Land Rover Discovery 1 Analog Clock Conversion Frame 1994-1998 3D Printed PETG
$24.99

Converts the Discovery 1 digital dash clock (the clock/hazard panel, BTR6443) into a classic analog clock using a Range Rover Classic clock movement (YFB100410 black face; YFB100460 green is believed to be the same size). The set includes the front frame (choose with or without a badge recess), back frame and clock holder. It snaps into the original 4 dash latches like the stock unit, and you transfer the hazard switch and badge over. Wiring: Pin 30 pink (permanent +12V), Pin 31 black (ground), Pin 58 red (illumination). Insulate all connections. The Range Rover clock, wiring and terminals are NOT included. Printed in PETG (ASA available).Design by Pugwash, licensed CC BY 4.0: \"Land Rover Discovery 1 Analogue Clock\" This listing sells a physical print. No changes were made to the design.This part is 3D printed to order after purchase. The photos show the designer\'s reference print, not the unit you will receive. Color and surface finish can vary slightly. It ships within 5 business days. This is an aftermarket reproduction/accessory. It is not an OEM part and is not affiliated with or endorsed by the vehicle manufacturer. OEM part numbers are listed only for reference and cross-checking. Please confirm fitment with the compatibility chart and the OEM part number before buying.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.