LCD Single Axis Automatic Solar Tracking Remote Control Solar Tracker Controller

Package Included

Optional A: Only Single Axis Solar Tracker Controller

Optional B: Single Axis Solar Tracker Controller+Remote Control

Optional C: Single Axis Solar Tracker Controller+Wind Speed Sensor

Optional D: Single Axis Solar Tracker Controller+Remote Control+Wind Speed Sensor

Optional E: Only 1PC Switch Cable
Optional F:Only 1PC remote control

Notes: Pls check each mode carefully and choose the right mode as you need!

Single Axis Solar Tracker Controller

Features:

1.High tracking accuracy, average tracking accuracy ≤ 1° (Actual accuracy is related to the platform’s moving speed);

2.The light sensor has a wide range of detection angle and high accuracy. It’s inside the waterproof case, waterproof, dustproof and anti-aging;

3.With LCD display which can show multiple working modes and parameters;

4.Many of the parameters can be set (Tracking accuracy, threshold value of the light sensor, threshold value of the wind speed sensor, the interval time of cyclical tracking, etc...);

5.With strong wind protection mode (Wind speed sensor is required);

6.Can set the platform stay at any position at night (or cloudy day);

7. Can connect limit switch;

8.Can be operated by IR remote control or the buttons on the controller box;

9.Reverse battery protection, over-current protection; standby current ≤15mA.

Wind Speed Sensor

This wind speed sensor is composed of a shell, three wind cups and a circuit module. The whole sensor has a high strength, weather resistance, corrosion resistance and water resistance, will be to ensure the long-term use of the instrument, and the accuracy of the wind speed collection. It is very suitable for outside Polycarbonate Material

Color: as picture

Accuracy:± 1m/s

Start-up Wind Speed: 0.2-0.4 m/s

Output Type: Voltage Output

Measurement Range: 0-32.4m/s

Output Signal: 0-2.5V

Wind Speed: (Output voltage*2 /5)*32.4m/s

Cable Length: 3 Meters

Infrared remote control

Effective distance: 8m

2xAAA battery (not included)

Proximity limit switch

The limit signal can be detected and fed back to the controller. The line is 1.2m long.