Killscreen Dyno™ AT Adjustable Tension TMR Stick Module
ADJUSTABLE TENSION. TMR PRECISION. BUILT FOR DUALSENSE EDGE™.
TURN THE STICK. CHANGE THE FEEL.
Meet Dyno™ AT — the adjustable-tension evolution of Killscreen’s Dyno™ TMR stick module for the Sony DualSense Edge wireless controller.
Built around the K-Silver JT13 Pro (JT13-009) adjustable-tension TMR joystick, Dyno™ AT combines high-resolution contactless magnetic sensing with an integrated mechanical tension-adjustment system that lets you change the physical resistance of the thumbstick simply by turning the stick top.
No tools. No opening the controller. No swapping springs or internal parts. Dial in a lighter, faster feel or increase resistance for a firmer, more deliberate response, then change it again whenever you want.
This isn’t a modified OEM Edge module. Dyno™ AT is a purpose-built upgraded platform with adjustable stick tension, TMR magnetic sensing, professional Killscreen calibration, fully unlocked recalibration, and firmware-update capability.
WHAT'S INCLUDED
- 1 Killscreen Dyno™ AT Adjustable Tension TMR Stick Module
- USB Firmware Updater included
The included USB updater supports potential future module firmware updates. No firmware update is currently required for normal installation, but keep the updater in a safe place.
Note: Dyno™ AT retail boxes are temporarily out of stock. During this time, Dyno™ AT modules may ship in standard Dyno™ packaging clearly marked with "AT"to identify the adjustable-tension version. The product inside is the same Dyno™ AT module described in this listing.
WHY DYNO™ AT?
- K-Silver JT13 Pro (JT13-009) adjustable-tension TMR joystick
- Tool-free adjustable thumbstick tension
- Adjust tension simply by rotating the integrated stick top
- Go lighter for quick movement or add resistance for a firmer, more controlled feel
- High-resolution TMR magnetic sensing
- Fast, precise analog response built for competitive play
- Exceptionally smooth thumbstick tracking
- Contactless magnetic sensing with no conventional potentiometer track to wear down
- Professionally pre-calibrated by Killscreen
- Fully unlocked calibration — fine-tune for your controller or recalibrate anytime using our supplied calibration tool
- Plug-in installation — no soldering required
- Firmware-update capability via the included USB updater
- Designed specifically for the DualSense Edge wireless controller
ADJUSTABLE TENSION — RIGHT AT YOUR THUMB.
Dyno™ AT puts physical stick resistance directly under your control. The tension-adjustment mechanism is integrated into the thumbstick assembly, allowing you to change the feel simply by rotating the stick top.
Prefer a lighter stick for fast movement and rapid directional changes? Dial it down. Want a firmer feel for more deliberate aiming and controlled inputs? Increase the resistance. You can adjust it whenever you want without removing Dyno™ AT from your controller.
No disassembly, internal adjustment, or special tool is required.
IMPORTANT: INTEGRATED THUMBSTICK TOP
The Dyno™ AT thumbstick top is part of the adjustable-tension mechanism and is not designed to be removed or replaced with standard DualSense Edge interchangeable thumbstick tops.
Add-on thumbstick caps and grips that fit over the installed stick top may still be used, giving you additional options for grip, texture, and stick height.
TMR MAGNETIC SENSING
Traditional analog sticks determine position using physical resistive potentiometer tracks. Dyno™ AT uses TMR magnetic sensing instead. The result is a highly responsive contactless sensing system built for smooth movement, precise input, and consistent long-term performance without relying on the conventional potentiometer sensing track found in standard stick assemblies.
PRE-CALIBRATED. THEN TUNED TO YOUR CONTROLLER.
Every Dyno™ AT is professionally calibrated and individually prepared by Killscreen before shipment, establishing a precise calibration baseline before installation. Because small variations can exist between individual DualSense Edge controllers, we recommend running a quick first-time calibration after installation to fine-tune Dyno™ AT to the characteristics of the controller it is being used in.
With Killscreen Calibration, you can check centering, inspect thumbstick response, verify performance, and recalibrate your Dyno™ AT anytime directly from your browser.
Your calibration stays fully unlocked.
INSTALLATION
- Power off your DualSense Edge controller and disconnect USB.
- Remove the front trim and unlock the stick-module lever.
- Remove the existing stick module.
- Insert Dyno™ AT until fully seated.
- Lock the module and reinstall the trim.
- Recommended: Run a quick first-time calibration to fine-tune Dyno™ AT to your controller.
- Adjust thumbstick tension to your preferred feel.
No soldering or internal controller-board modification is required.
COMPATIBILITY
- Sony DualSense Edge wireless controller
- PlayStation 5
- PC use where the DualSense Edge controller is supported
Not compatible with standard non-Edge DualSense controllers. This listing is for one removable Dyno™ AT stick module, not a controller and not a pair of modules.
FIRMWARE UPDATES
Dyno™ AT supports module firmware updates using the included USB updater. The updater is included so you have it available if a supported firmware update is released in the future. Keep it with your Dyno™ AT hardware even if you do not need it immediately.
PRECISION, WITH ANOTHER DIMENSION OF CONTROL.
Dyno™ gave the Edge a competition-grade TMR platform. Dyno™ AT gives you control over how that platform feels.
K-Silver JT13 Pro adjustable-tension hardware. TMR magnetic sensing. Professional preparation. Controller-specific fine-tuning. Fully unlocked calibration.
Set the tension. Set the calibration. Make it yours.
IMPORTANT NOTES
Thumbstick tension changes the physical resistance and feel of the stick. It does not replace in-game sensitivity, deadzone, response-curve, or other software settings.
Actual in-game response may also be affected by controller configuration, connection method, console or PC, display, software, game engine, and individual game settings.
Sony, PlayStation, PS5, DualSense, and DualSense Edge are trademarks or registered trademarks of Sony Interactive Entertainment Inc. Killscreen™ and Dyno™ are not affiliated with, endorsed by, or sponsored by Sony Interactive Entertainment. Dyno™ is a trademark of Killscreen LLC.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.