Keyestudio W5500 Ethernet Shield
Network expansion board for Arduino UNO R3 and Mega 2560 R3 (without POE)
Important Notice
Key Features 🌐W5500 Hardware TCP/IP
Hardware TCP, UDP, ICMP, IPv4, ARP, IGMP and PPPoE support, 10/100Mbps Ethernet, 8 independent sockets and 32KB internal buffer.
Simple Web Server
Build a web server or read and write digital and analog pins over the network.
TF Card Slot 💾
Supports mini SD (TF) card read and write with a self-popping socket.
Stackable Design 🔧
Stacks directly onto the control board, and other shields can stack on top. Four 3mm fixing holes for easy / 0304AChipW5500Input VoltageDC 5VWorking VoltageDC 3.3VWorking CurrentAbout 380mAMaximum Power3WWorking Temperature-55 to +75 CNetwork InterfaceRJ-45Header Pitch2.54mmDimensions65mm x 50mm x 27mmWeight25gCompatibilityKeyestudio UNO R3, Mega 2560 R3 (Arduino-compatible boards)Package Contents
ImagesFAQWhich boards does it fit?
It is compatible with Keyestudio UNO R3 and Mega 2560 R3 development boards.
Does it support Power over Ethernet?
No, this is the version without POE. Power comes from the control board.
Which IDE version should I use?
The manufacturer tested with Arduino IDE 1.5.6 and notes other versions are not compatible.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.