Keyestudio GPIO Expansion Shield for Raspberry Pi Pico DIY Breakout Board

Keyestudio GPIO Expansion Shield for Raspberry Pi Pico

Solder-Free DIY Breakout Board with Lego-Style Mounting Holes 🔧

Choosing your option: This listing has two selectable variations. Pico Board = the base Raspberry Pi Pico development board only. Pico IO Shield = the Keyestudio GPIO expansion shield only (no Pico board included). Please review the option names carefully before purchase to ensure you select the item(s) you need.Overview

Key FeaturesSolder-Free Design

Plug-and-play GPIO breakout, no soldering required for quick setup.

Rich Communication Ports

2x I2C, 2x UART, 2x SPI plus 13 digital and 3 analog IO pins.

External Power Input

Dedicated 6.5-12V DC jack outputs regulated 3.3V/5V for external sensors.

Lego-Compatible Mounts

Built-in mounting holes for secure, modular sensor wiring layouts.

SpecificationsPower Supply5VOutput Current≤500mADC Input Voltage6.5V - 12VOutput VoltageDC 3.3V / 5VOperating Temperature-10°C to 50°CBoard Size45.34mm x 83.62mmPin Header Spacing2.54mmDigital IO13 pins (GP2, GP3, GP12-GP22)Analog IO3 pins (GP26, GP27, GP28)Compatible ModelRaspberry Pi Pico (RP2040)Product NumberKS3017 / SMP0097Product ImagesFAQDoes this include the Raspberry Pi Pico board?

Only if you select the \"Pico Board\" option. The \"Pico IO Shield\" option is the expansion shield alone.

Do I need to solder anything?

No, the shield connects directly to the Pico\'s GPIO pins with no soldering required.

What external power can I use?

Any 6.5-12V DC power source can be connected through the onboard power jack.

Is this compatible with other RP2040 boards?

It is designed specifically for the Raspberry Pi Pico\'s GPIO pin layout.