Keithley 2000 6.5 Digit Bench Digital Multimeter DMM 6-1/2 GPIB RS-232 TestedInspected in JapanShips from JapanTracked ExpressItem Condition
[Guaranteed] Arrived in working condition from a development institute or research center.
We do not perform calibration, so we cannot guarantee the accuracy and precision of the unit within the calibration period.
Please purchase this item with the understanding that it is a used item.
The previous owner reports scratches, scuffs, and slight discoloration (yellowing) on the front bezel. The exterior has been cleaned.
Known defect: the front-panel keys we used respond only with a firm or repeated press. The unit is fully operable this way, but please expect stiff keys.
Operation Check
- Power: turns on normally. Rear line-voltage setting found at 100V
- Startup: no error number shown at boot. Firmware REV A05 A02
- Display: readable. Units shown correctly, e.g. KOHM on the 3.3 kOhm range
- DC voltage: +1.000 V applied, read 0.999749 VDC
- DC current: 10.00 mA applied, read 9.99768 mADC. Positive and negative polarity both OK
- AC voltage: 1 kHz sine, about 2.000 Vrms into a high-impedance input, read 1.99164 VAC
- 2-wire resistance: 3.3 kOhm resistor read 3.30846 kOhm. 10 kOhm resistor read 010.0588
- Front-panel keys (DCV, ACV, Ohm 2W, DCI, DIGITS, RATE, AUTO, STEP, SHIFT/HALT): respond with a firm press
Included Items
- 1x red power cord (IEC C13 connector, 2-pin plug with separate ground lead)
Please check the photos for exactly what is included.
Please check the photos for the included accessories.
Product Info
The Keithley 2000 is a 6.5-digit bench digital multimeter for precision lab, production test, and R&D work. It measures DC/AC voltage, DC/AC current, 2-wire and 4-wire resistance, frequency/period, continuity, diode, and temperature.
It has front and rear input terminals with an F/R selector, standard IEEE-488 (GPIB) and RS-232 interfaces, Trigger Link, and an option slot for a scanner MultimeterCountry/Region of ManufactureUnited StatesDisplay Resolution6.5 DigitsDC Voltage Range100 mV - 1000 VAC Voltage Range100 mV - 750 VDC Current Range10 mA - 3 AAC Current Range1 A - 3 AResistance Range100 Ohm - 100 MOhm (2-wire / 4-wire)Frequency Range3 Hz - 500 kHzInterfaceGPIB (IEEE-488), RS-232Form FactorBenchtopShippingDuties & TariffsReturnsAbout Us
We ship worldwide from Japan by DHL / FedEx express with a tracking number on every order.
- Orders are dispatched Monday to Friday. Weekends and Japanese public holidays are not available because the carriers are closed.
- We can only ship to the address registered on . If you need a different address, please update it on before ordering.
- Every item is professionally packed with double-wall boxes and cushioning. Sensitive equipment is packed in anti-static material.
- We do not mark merchandise values below value or mark items as gifts. Japanese, U.S. and international regulations prohibit this.
For buyers in the United States: This item is shipped with all duties prepaid (DDP). The applicable U.S. import tariff is already included in the item price — you will not be charged any additional duties or fees upon delivery.
For buyers outside the United States: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer\'s responsibility. Please check with your country\'s customs office to determine what these additional costs will be prior to offerding or buying.
Important - if a DDU shipment is returned to us: When an item ships with duties unpaid (DDU), the carrier will contact you to collect import charges and any clearance documents required. Please respond promptly. If the shipment cannot be delivered and is returned to us because import charges were left unpaid, or because the carrier\'s requests went unanswered, \'s Money Back Guarantee does not cover an order that could not be delivered for these reasons. In that case we will refund the item price once the returned item reaches us, less the actual round-trip shipping and any return or customs charges billed to us by the carrier (at cost, documented). Please make sure you are able to receive the shipment before buying.
Returns are accepted under the return policy shown at the top of this listing, and every order is covered by Money Back Guarantee.
- If anything is wrong with your order, please message us first — we answer every message and will work with you until it is resolved.
- Any damage caused in transit should be reported within 3 days of delivery, with photos of the item and the outer box.
- Returned items must include all accessories and the original packaging.
We are a Japanese company specialising in used equipment sourced within Japan. Every unit is received, inspected and photographed by our own team in Niigata before it is listed — the photos in this listing are of the actual item you will receive.
Japanese equipment is typically kept in careful condition, and we describe exactly what we find, including any faults. If you have a question about this item or are looking for something we do not currently list, please feel free to contact us.
Inspected In-House
Checked and photographed by our own technicians before listing. What we find is what we write.
Packed for Transit
Double-wall boxes, cushioning and anti-static material for sensitive equipment.
Tracked Worldwide
DHL / FedEx express from Japan with a tracking number on every single order.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.