KINGBOLEN OBD2 Scanner Code Reader Check Car Engine Fault Diagnostic Tool YA200

[Key Reasons To BuyYA-200]

• Check Engine Light/Turn off MIL(MalfunctionIndicator Light)
• Help to Pass Vehicle Safety Inspection and Emissions Inspection
• Full OBDII Diagnostic Functions
• Advanced Mode6 On-Board Monitor Test and Mode8 EVAP Test/Compoment Test
• with Record and Playback Functions
• Battery Test
• Screenshot Display
• 9 Languages supported and Extensive Vehicle Coverage
• Thoughtful Design:YA200 is equipped with a 320 x 240 pixels display with 2.4 inches TFT color display & With 3 hotkeys.
• Easy to use : Just plug and play, no batteries are needed.

• Lifetime Free Update (Note: UPDATE IS NOT NECESSARY before utilization. The YA-200 comes with 31.5 inch cable)

11 Kinds of Languages supported

English, French, Russian, German, Italian, Spanish, Portuguese, Polish, Japanese, Simplified Chinese, Traditional Chinese

KINGBOLEN YA200 support Complete OBD2 Function

Show the detailed description of the Diagnostic Trouble Code (DTCs)

2. Erasing Codes & Reset
Turns off Check Engine Light (MIL), clears codes and resets monitors.

3. Data Stream
Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

4. I/M Readiness Status:
Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

5. Read Live Data Stream
Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

6. View Freeze Frame Data
Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

7. O2 Sensor Test
Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

8. On-Board Monitor Test
Retrieves and displays test results for emission-related powertrain components and systems.

9. Read Vehicle Information
Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

10. Component Test
Certain vehicle components can be actuated by commands sent from the scanner to test their operability

Accurate Real-time Data Flow, supports Graphical Recording and Playback

KINGBOLEN YA200 support Real-time Voltage Test

It can display the voltage of OBD diagnostic socket and the status after evaluation. It mainly feeds back the current voltage condition of the diagnostic socket or the battery condition.

* If the voltage of the battery is lower than 12V, it is recommended to go to the professional tester to diagnose the current battery condition.

I/M Readiness

Check that the vehicle\'s emissions system is functioning properly

One-click design makes diagnosis easier and faster

1. One-click I/M Readiness:

Just click a button to query I/M Readiness

2. One-click DTC

Looks up definitions of Pending Codes stored in the scan tool and shows the possible causes of the DTC (Not every DTC with possible causes reason).

3. One-click VIN

Displays the vehicle\'s identification number.

KINGBOLEN YA200 support Screenshot Function

you can take screenshots during the use of the YA200 code scanner to record the diagnosis results at any time.

Just which can store up to 10 pictures.

KINGBOLEN YA200 support Lifetime Free Update

KINGBOLEN YA200 OBD2 comes with Lifetime Free Update, which can be upgraded simply by connecting to a PC with a USB cable.

KINGBOLEN YA200 Code Reader meets the following protocols

1. SAE J1850 PWM (41.6 Kbaud)
2. SAE J1850 VPW (10.4 Kbaud)
3. ISO 9141-2 (5 baud init, 10.4 Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)

KINGBOLEN YA200 support 10,000 + car models

American (USA) car:

Compatible with Standard OBD2 Cars from 1996 to Now:

For Chrysler, for Ford, for GM, for Jeep...

European car:

Compatible with Standard OBD2 Cars from 2003 to Now:

For Alfa Romeo, for SAAB, for Acura, for Opel, for Audi, for Seat, for Bentley, for Skoda, for Daewoo, for Benz, for Daihatsu, for Land Rover, for BMW, for Vauxhall, for Volvo, for VW, for Ford, for Jaguar...

France Car after 2006:

for Citroen, for Fiat, for Renault, for Peugeot

Not Support for Renault Clio 2/Megane/Dacia Logan..

Asian car

Compatible with Standard OBD2 Cars from 2007 to Now:

for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai, for Dacia, for Lexus, for Mazda, for Nissan, for Subaru, for Suzuki, for Toyota....

Chinese car:

Compatible with Standard OBD2 Cars from 2009 to Now:

for BYD, for Chery, for Geely, for Great Wall, for Karry...

Please note: KINGBOLEN YA200 is only for 12V 16PIN OBD2/EOBD Car engine diagnosis.

* Does not support Trucks, semi-trailers, dump trucks, tractors, hybrids, electric vehicles and other commercial vehicles.

Technical parameters of KINGBOLEN YA200

1. Display: 320 x 240 pixel display with TFT color screen.
2. Operating Temperature: -10°C to 40°C (14°F to 104°F).
3. Storage Temperature: -20°C to 70°C (-4°F to 158°F).
4. External Power: 9.0V to 16.0V power provided via vehicle battery.
5. Product Size: 137 × 79 × 22 mm (5.4\"×3.1\"×0.9\").

Packing List of KINGBOLEN YA200

1PC * KINGBOLEN YA200 Code Reader
1PC * USB Cable
1PC * User Manual
1PC * Carton box

We accept PayPal payment.

Pls contact us if you need to use another method to pay.

Pls finish Payment within7 days after offerding ends,otherwise a unpaid item case will be opened to you.

All created orders will be shipped within 1 business day after payment been confirmed.

The shipment will be sent with USPS or UPS shipping from US warehouse in NJ or LA.

Delivery time varies from 2 to 6 business days. If you didn\'t receive the package in the estimated time, please contact us at once,we will give you the best solution.

We are authorize distributor of Launch and other brands, all items are 100% original.

All items can be returned within 30 days if you don\'t satisfy with it.

All items can be exchanged within 90 days if the item with functional error.

All items including 12 months free repair, just contact with the seller to proceed if with any problem.