JLG 1001225164 OEM Pressure Transducer Sensor WIKA MH-4 Scissor Lift
$125.00

JLG OEM Pressure Transducer — Part Number 1001225164 Rev E
Brand-new JLG OEM pressure transducer / pressure sensor. This is the genuine part, manufactured by WIKA (model MH-4) and laser-marked with the JLG part number. It is used on a wide range of JLG scissor lifts, mounted on the main lift cylinder, as part of the machine\'s platform load-sensing / overload system.
Please confirm fitment for your exact model and serial-number range before purchase. JLG\'s official usage list includes:
1532R, 1932R, 2632R, 4045RES1330L, ES1530L, ES1530LC, ES1932, ES1932I, ES2632, ES2646, ES3246R1532I, R1932I, R2632, R3246, R4045
What is stamped on this unit (photos 2, 6, and 7 show the markings):
• JLG part number: 1001225164 Rev E (plus a short batch/date code)• Manufacturer: WIKA, model MH-4• WIKA P#: 14534810• WIKA I#: 1100M76V• Made in Klingenberg, Germany (DE-63911)• Supply: 5 V (DC), max. 10 mA• Output: marked \"0.5 …\" (the rest of that line wraps out of view). This matches the standard WIKA MH-4 ratiometric output of 0.5–4.5 V at a 5 V supply, but the \"4.5 V\" end of the range is not fully visible on the stamp, so we are not listing it as a confirmed reading.• Pressure range: the stamp starts \"0 … 10…\" and wraps out of view. Independent JLG-parts listings describe this part number as a 0–100 bar (0–1,450 psi / 0–10 MPa) transducer. We believe that is correct and it is consistent with the visible digits, but the unit and trailing digits are not fully readable in the photos.• Marks: CE, UKCA, FM US, WEEE
Other features visible on the part (not a complete specification):
• 3-pin male electrical connector with a single locking tab and a triangular pin layout. This most closely matches an AMP Superseal 1.5, 3-pin connector (a standard WIKA MH-4 option). Match the connector in the photos to your machine harness before installing. We do not have a confirmed pinout from JLG.• Straight-thread process connection with a green O-ring in the undercut (O-ring boss style). This appearance matches SAE 7/16-20 UNF (SAE J1926 / J514), which is a standard MH-4 option. The thread size is not stamped on the body; use a thread-pitch gauge if you need to be certain.• Stainless-steel body and hex; black plastic connector.
What this is not:
This is a pressure transducer (analog sensor), not a simple pressure switch. A cheap \"pressure switch\" listing for a similar-looking part is not the same item.
Condition and shipping:
New, unused. Quantity available as shown. Free shipping from Conroe, Texas. Volume pricing is offered if you buy 2, 3, or 4 or more (see the listing for the exact per-unit prices).
Buyers: always verify the part number, connector, and thread against the unit you are replacing and against your JLG model/serial range. We have not opened or electrically tested these units.
Related numbers (for search and comparison only — read the notes below):
• WIKA 14534810 / MH-4 / 1100M76V — stamped on this unit.• Danfoss MBS 1250, 063G2221 — a discontinued 0–100 bar, 7/16-20 UNF, ratiometric 0.5–4.5 V sensor that some European JLG-parts sellers cross to 1001225164. That Danfoss unit used a Deutsch DT04 3-pin connector, which does not appear to match the connector on this WIKA-built part. Do not assume they are a drop-in swap without checking the harness plug.
Official JLG list price for 1001225164 is published on JLG Online Express. This listing is for the same OEM part number.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.