|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
JESSEM Clear-Cut Precision Stock Guides JessEm# 04215
$138.98

NEW, JESSEM Clear-Cut Precision Stock Guides, JessEm# 04215, 158903, Unique roller system holds down workpiece and pushes into fence for precision stock feed, 1-1/2\" urethane one-way rollers set at 5° toward fence and 2-3/4\" total adjustment, Maximum stock thickness from router table surface to 9/16\" below center of T-slot, Compatible with most router table fences with a horizontal 1/4\" T-slot above the fence faces, JessEm® Clear-Cut™ Precision Stock Guides are the ultimate hold-down on the router table. Featherboards are limited in their ability to guide material accurately against a router table fence while Clear-Cut™ Stock Guides operate on the same principle as a stock feeder in that the stock is guided at a slight angle as it is fed forward. Rollers with one-way needle bearings areNEW JESSEM Clear-Cut Precision Stock Guides, JessEm# 04215 - 158903 by JessEmJessEm® Clear-Cut™ Precision Stock Guides are the ultimate hold-down on the router table. Featherboards are limited in their ability to guide material accurately against a router table fence while Clear-Cut™ Stock Guides operate on the same principle as a stock feeder in that the stock is guided at a slight angle as it is fed forward. Rollers with one-way needle bearings are mounted at an angle, effectively steering your stock toward the fence. Stock is pulled tightly to the fence, and the gripping force of the rollers holds it securely in position. - Unique roller system holds down workpiece and pushes into fence for precision stock feed
- 1-1/2\" urethane one-way rollers set at 5° toward fence and 2-3/4\" total adjustment
- Maximum stock thickness from router table surface to 9/16\" below center of T-slot
- Compatible with most router table fences with a horizontal 1/4\" T-slot above the fence faces
- Includes one infeed stock guide, one outfeed stock guide and detailed instructions

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|