Inception Designs Autococker Universal IVG Velocity Adjuster - Polished Black
$19.95

The Inception Designs Autococker / Sniper Pump / Resurrection Autococker Universal IVG V2 is the 2nd version of the universal threaded IVG. This will work in 2k+ threaded WGP bodies (including Karnivor), and it will work in all Inception and Empire Autococker or Sniper gun bodies.The IVG comes with two \"tension\" o-rings. Use the thinner one for all WGP-based bodies and use the thicker one for all Empire or Inception-based bodies where the IVG area starts with a section of larger diameter that is not threaded.The center hole is designed to take a 3/16 Allen key and to be used with mid-blocked guns or full-body guns with a cocking rod without the cocking rod installed, but to make it super easy you can leave the cocking rod in place (it fits through the center hole) and use a 1/8th Allen key in one of the outer Allen key holes to adjust your spring tension.** The Karnivor ICS system uses a larger shaft that will not fit through the center hole in this IVG. This IVG is intended for guns with cocking rods, not ICS. With that said, several users have drilled the center hole just slightly larger and used it very happily with the Karnivor ICS. You can then use a standard 1/8th Allen key to adjust the velocity.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.