Case Feeder Tube Extension Kit – 4 Tubes with Couplers
This extension kit is designed for use with my 3D-printed case feeder and includes:
Tube Length & Finishing:
The extensions are cut from longer sections of tubing, so exact lengths may vary slightly. One end of each tube is rough-cut. The tubes can be trimmed to your desired length, and I recommend trimming and cleaning up the rough-cut ends for a smoother finish.
Installation & Important Notes:
The original case feeder tubes are not designed to be extended beyond approximately 12 inches. Longer extensions may work, but use caution, as additional height can affect stability and feeding reliability.
The couplers are intentionally not designed as a tight press fit to help maintain a smooth, unobstructed path for the cases to travel through.
Once the tubes are connected, I recommend applying a small amount of hot glue externally at both ends of each coupler to secure the connections. Keep glue out of the inside of the tubes to prevent cases from catching or jamming.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.