High-Speed Automatic Friction Paging Conveyor Variable Frequency Conveyor 200W

新建网页 5 　

Automatic Paging Machine with Conveyor 110V

　

　 　 　

　 　

Introductions:

　

　

The friction type paging conveyor is mainly used for automatic paging of sheet products

with various thicknesses and various materials,such as scraps of paper,name cards,labels,

cards of various materials, telephone cards,IC cards,IP cards,game rechargeable cards,

plastic composite packaging bags, paper box pieces and paper bags. It can separate a

pad of sheet products into independent pieces,and convey them one by one,

thus to let the ink jet machine to spray codes piece by piece or for other uses.

　

　

Photoelectric sensor may be installed to count products.It can also be set to shut down

when a certain quantity is reached.The friction type paging conveyor can be widely

applied to the industries of daily 　 　 　

　

Precaution!

　

　 1. Before using for the first time, the operator shall read through the manual carefully.

2. Before connecting the machine to power supply, the machine shall be checked to have the power switch at [off] status. Then please operate the machine according to the steps instructed on the user manual.

3. If the machine would be stopped and not used for a long time, please clean it with dry cloth. Do not use corrosive cleanser while cleaning the machine.

4. It is forofferden to splash fluid into inner parts of the electric cabinet for it may corrode or result in short circuit of internal electrical elements.

5. Please check the appearance of the machine to guarantee no deformation, damage or rust, and all shafts shall be able to rotate flexibly without blocking.

6. The machine is designed as single-phase AC 220V, and the power line is equipped with a 3-line flat plug, which shall be connected to a 3-pin socket with earth wire. The machine is equipped with a 110V-to-220V transformer, and the machine can normally operate after being connected to the 110V power supply through the transformer.

7. Conveying speed range: 20~50Hz. The too slow speed can easily result in motor heat and damage.

8. For the parameters of the inverter of the machine, all parameters, except the motor speed (frequency), shall not be adjusted by yourself, for it may be hard to reset and the machine may not run normally.

9. Please do not start the motor if no article is placed on the machine for paging, thus to avoid long-time friction between the pressing leather and the paging belt which may shorten the service life of the machine.

　 　

Product Parameter:

　

　 Voltage Input Voltage: 110V

Output Voltage: 220V

(Note: The machine voltage is 220V. There is a 110V-to-220V transformer included in the packing list. It can convert the 110V power into the 220V power for the machine.)

Machine Power 200W Applicable Product Range

Length: 2.75-12.59 inch (7-32cm), adjustable

Width: 3.14-11 inches (8-28cm), adjustable

Thickness: 0.0007-0.196 inch (0.02-5mm), adjustable Net Weight 108LBS (49kg) 　 　

　 　

Product Features:

　

　 　
Control Panel

The control panel integrates the power switch, the stop switch and the frequency converter and is easy to operate and control. The frequency converter adopts a knob structure and digital display screen, facilitating frequency adjustment and display during operation.
　

　
Motor

The high-quality motor can provide stable driving force for the paging machine, ensuring the paging and conveying operation is stable and smooth, improving the working efficiency and reducing the maintenance cost.
　

　
Paging Mechanism

The paging mechanism can separate multiple materials into pieces, can be adjusted to adapt to various materials of different specifications and has high paging efficiency and reliability.
　

　
Conveyor Belt

The conveyor belt is resistant to wear and good in flexibility, can convey the separated products one by one continuously and smoothly and has high conveying stability and long service life.
　

　
Supporting Frame

The supporting frame is made of stainless steel materials, improves the structural strength and supporting stability, and is resistant to rust and corrosion and easy to clean and maintain.
　

　
Supporting Legs

The supporting legs are adjustable in height, can well keep the machine body stable and balanced, greatly reduce the vibration of the machine during operation and are convenient to use and replace.

　 　

Operation Method:

　

　 1. Connect the power cable to the single-phase power supply (with good earth wire).

2. Press down the general power supply switch on the operating panel,and then the inverter is on.

3. Adjust the paging width.
Adjust the space between the left and the right guide pieces according to the width of the product for paging. The space shall be 0.5-1mm wider than the product, and the center of the product shall be aligned to the center of the guide belt. Then screw down the bolts of the front and the back guide pieces.

4. Feed the products.
Put a pad of products (guarantee to have no adhesion phenomenon) onto the paging assistant plate between the left and the right guide pieces (or the enlarged supporting board or widened supporting board), and make them as a slope inclined backwards and push them into the baffle plate position.

5. Adjust the paging pressure.
In order to separate the products into pieces successfully without overlapping or blocking, adjust the interval and pressure between the pressing leather and the paging belt. If the interval has been well adjusted at the time when it is out of factory, the adjustment to this interval can be omitted.

6. Run/Stop the machine.
Connect the machine to power supply and press the green button, then the lamp will turn on; screw off the red emergency stop button, and rotate the black button of the inverter clockwise to adjust frequency. Then the conveying belt, guide belt, and paging belt would rotate to perform automatic paging.

7. Adjust the speed.
In order to perform paging for the products successfully, the inverter can be adjusted to regulate the speed of the whole machine, thus to reach the best effect. The speed can be increased or reduced by rotating the black knob on the inverter. And the displayed frequency value would be increased or decreased accordingly.

8. Shutdown
At the time of shutdown, please press the red stop switch, and then press the green power supply switch, and finally pull out the plug.

　 　

Item Included:

　

　 Automatic Paging Machine with Conveyor 230618 　 　

Shipping & HandlingDetails

Default Shipping Cost or Free Shipping Information:

▲Defaultshipping cost or free shipping service is only for thecustomers from Canada or the lower 48 United States byCanada Post, USPS orthe UPS Ground.Customers from other areas or needs other shipping ways, please contact us.
▲Buyersfrom Guam,Puerto Rico, Virgin Islands, American Samoa,Alaska,Hawaii,PO Boxes, APO/FPO addresses or othercountries/areas,thereWILL be extra shipping costs, please contact us for more detailedinformation.
▲Pleasemake sure your address is valid for both UPS and USPSservices. Anycosts incurred because of incorrect orundeliverable address shouldbe undertaken by buyer.

Handling Time:Shippingis usually made in 1-3 business days after paymentscleared. Orders are processed fromMonday-Friday; Not on the weekends & publicholidays.

Sales tax/Customsduties:Anysales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer.

Damage InShipping:Emailor call us First! We will workwith you to get the case resolved in the fastest method.

Return / Refund

If you are not 100% happy with yourpurchase, please contact Us. Please don\'t directly openeda request or case without informing us, or else, we willdo some discounts on the warranty and other sales-services later on. Hope for your understanding.

Returns & Exchanges

▲Allreturns must be made within 14 days of delivery date. Itemsmust be in new, unused condition, with all originalmaterials included with the shipment. A partial refund may be applied for opened or damaged items, depending on thecondition.
▲Itemsreturned under the buyer\'s remorse: The return shipping feemust be covered by the buyer;The original shipping costwill also be deducted from the refund. 15% restocking feeof the items purchase price will be charged.
▲Returnsthat are the result of our seller\'s error: Buyer willreceive a full refund of the item as well as shipping charges
▲All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.

Defective & Damaged Products

▲Ifproduct was received damaged or not as described, pleasesend us some pictures or videos, so we could wellunderstand your problem, then solve them for you ASAP.Besides, it\'s much helpful for us to claim with UPS,remind our related department to pay much more attention to packaging later on. Hope for your understanding.
▲Replacementor refund of defective or damaged products can only bereturned in exchange for the exact same product,or else,the purchase price will be refunded back to your originalpayment method.
▲Ifan item is received damaged,customer service must becontactedwithin 7 days of receiving your item. Allreturns require a RA (Return Authorization) number asabove.

Warranty & response

▲6months\' warranty for the machines, not for the consumables.We standbehind our products all the item,so even if yourwarranty periodhas expired, you canstill seek for service or technical supportfrom us with low cost.
▲Anywarranty shipping cost to us is responsible by buyer.
▲Anyshipping cost to buyer is responsible by the seller.
▲Wecommittee to the customer satisfaction and want to bringyou the best purchase experience. If there is anyproblems,please contact us ASAP. If not,please leave usa positive response as it\'s very important for us. Thanksvery much. 　

On Sep 2, 2026 at 20:36:46 PDT, seller added the following information: