Up For Your Consideration1-HME PRO850 Wireless Intercom System Base(BS850)S/W:6 BAND:2#TX:1 #RX:4The Clear-ComPRO850 IS THE SAME AS AHME PRO850Tested In Good Working Condition
Comes with New IEC Power Cable And Two 1/2 Wave Antennas
BASE STATIONMore Operating Power
- Frequency agility enables you to operate the PRO850 within the 470-698 MHz UHF band. These synthesized frequencies can be selected in 25 kHz increments over each 18 MHz operational band so you can easily choose from 720 different transmit and 720 receive frequencies. The upper band is limited to 12 MHz and 480 receive frequencies.
- User-friendly graphical interface on the base makes it easy to set up the system and obtain status information using the LCD display and menu keys. Pull-down menus on the LCD provide fast, easy access to all system features. Menus are organized by status, audiolevel monitoring, system configuration and system information. Simple navigation buttons and multi-function rotary knob facilitate the setup and access of desired features.
- PC interface using PC850 software lets you configure the entire PRO850 System and manage configuration files from the convenience of your PC via the RS-232 serial port.
- Expandable system allows you to configure the PRO850 to meet your communication needs. A standard PRO850 System comes with four beltpacs and a base station. By linking several base stations to provide additional receivers, up to 12 users can communicate with each other in full-duplex operation.
- Automated beltpac output power control helps optimize the system operating power. The base station automatically configures beltpac settings and calibrates the power level for each beltpac, depending on its distance from the base. This eliminates base receiver overload and extends the beltpac battery life.
- Intermodulation-free frequency groups have been pre-configured to help you easily scan and select the best, interference-free frequency groups when you set up the PRO850. The savvy user can also configure additional frequency groups for a quick recall.n Alert relay output provides a configurable set of contacts that can respond to problem conditions or to beltpac user requests.n Audio digitally mixed and routed under user control allows any combination of inputs to be mixed and delivered to any output. These settings can be preset and saved to provide different mix configurations for different shows.
- Remotely “unlatch” beltpacs from transmitting at the base to stop a rogue beltpac that’s been left transmitting without having to locate the beltpack.
Base Station SpecificationsGeneralFrequency Range: .................... 470-608 MHz, 614-698 MHz in Dual TX/RX BandsFrequency Response: .............. 50 Hz to 10 kHzPower Requirements: .............. 100-240 VAC, 50-60 Hz or 12-14 VDCSize: 19” x 1.72” x 11.75” (1-RU) (48.26cm x 4.37cm x 29.8cm)Weight: <11 lbs (<5 kg)Tx & Rx Antenna: ......................¼-Wave (Supplied),BNC Connector4-Wire I/O: .................................. RJ45, 600W Balanced, Level Adjustable, Simultaneous Operation with 2-Wire2-Wire I/O: .................................. XLR-3F, Externally-Switchable RTS® or ClearCom® Mode, 200W,Level Adjustable, Null AdjustableAuxiliary Input: ......................... XLR-3F/¼”Phone Combo Jack, 600W Balanced, Level AdjustableAux & Page Output: ................. XLR-3M, 600W Balanced, Level AdjustablePage & Alert Relay: .................. 2 Four-Pin Phoenix, 2A @ 30 VDC MaxBeltpac Interface: ..................... RJ10, RS-232PC Interface: .............................. DB9, RS-232, 38400 baudExternal Control Interface: .... RJ45, RS-422Headset Connector: ................. XLR-4M (Optional Field-Installable XLR-5F)Mic Input: ................................... Auto-Detect, Low Impedance Dynamic or ElectretHeadset Output: ....................... Stereo - 160 mW per Side, Mono - 250 mWFront Panel Controls: .............. Power Switch with Indicator, Menu Navigation Keys, Receiver Quick-Menu Keys, Rotary Knob for Adjustments, Headset Channel Select & PTTFront Panel Indicators: ....Graphic LCD 3 Wired System Status LEDs 4 Receiver Status LEDs Headset Channel Select & Talk LEDsRear Panel Controls: ................ 2-Wire Channel Line Null RTS®/ClearCom® Mode SwitchBELTPACNot Included, Just For ReferenceMore Flexibility
- PDA interface provides a convenient method to configure beltpac frequencies and functions through a built-in IrDA port using a Palm-OS PDA and PDA850 Tools.
- Beltpac controls are configurable for multiple transmit modes. Separate talk buttons for each channel can be configured for “pushto-talk” or “push-to-enable” operation. Buttons not configured for transmitter control can be configured for party-line selection, paging, ISO, alert and call functions.
- Individual volume controls allow beltpac users to adjust and mute the volume. The MASTER and Auxiliary Volume Controls provide a push-to-mute function so you can temporarily mute a channel while keeping previous volume settings.
- Dual-channel access allows users to choose from two hardwired intercom channels. Simultaneous dual-channel access is obtained using the optional 2nd receiver module.
- n Alert and Page Relay Closures allow you to remotely control external devices from the beltpac.
- Channel lockout enables multiple beltpac users to share the same operating frequency and automatically disable a beltpac’s ability to transmit if another user is already transmitting on that frequency.
- Low battery alert informs the user through the headset and base station that the beltpac batteries are low.
- Versatile headset connector allows use of standard 4-pin male connector or field-install of a 4-pin or 5-pin female XLR connector. The beltpac auto-detects the microphone type.
- Detachable antennas with strong, threaded connectors make storage and shipping easy.
- Auxiliary audio input allows a separate audio source, such as an IFB receiver, to be heard through the beltpac headset and controlled by the beltpac volume controls.
- LED blackout mode enables crew members to work on a darkened stage without tell-tale lights being visible to the audience. n Automatic status reporting to base keeps the technical crew informed of the battery condition and which users are talking.
FROM HMEHME\'s PRO850 UHF Wireless Intercom System is taking communication to the next level for soundand production professionals in the pro-audio market. The PRO850\'s potential application spans a wide range of businesssegments, including television broadcast, military, aerospace, theatres, stadium/concert events, churches, touring companies,schools, and other industrial companies. The PRO850 allows production crew members to easily communicate with theirmanager and each other via wireless, lightweight beltpacs without the hassle of dragging cables around their workingspace.
\"The PRO850 was designed specifically for and by pro-audio professionals,\" says Mike Hughes, General Manager of theProfessional Audio Division at HME. \"We know that these technically savvy professionals preferred more flexibility andoperating power in a wireless intercom system. We\'ve consulted extensively with field broadcast and sound engineers at virtually every stage of R&D to create PRO850, the ultimate wireless intercom system that meets their specific technical needs.\"
In addition to the standard capabilities offered by existing wireless intercom systems, the PRO850 comes with a multitude ofcutting-edge features designed to give pro-audio professionals more technical and creative freedom. Innovative features likefrequency agility, PC and PDA interface, simultaneous dual-channel interface, user-friendly graphical interface with pull-downmenus on the base, individual belt-pac volume control, belt-pac channel lockout, versatile headset connector, wireless ISO,and low battery alert are just some examples that make HME\'s PRO850 unique. Additional capabilities that distinguish thePRO850 from comparable systems include a wider operating range, clearer sound quality, more interference immunity andgreater reliability.
\"We\'re extremely excited about offering pro-audio professionals a system with more capabilities than anything out there,\"continues Hughes. \"The PRO850 is a significant technological innovation that has captured our customers\' interest longbefore its release. In fact, both Fox News and CNBC Studios have just purchased the PRO850.\" The PRO850 can be purchasedthrough HME\'s exclusive US Distributor, ASG (Audio Specialties Group: [phone removed by ], www.a-s-group.com) or through any ofHME\'s international pro-audio distributors.
About HME
HME is a leading provider of customer-focused solutions to enhance the performance and productivity of businesses in avariety of markets. Incorporated in 1971, HME was a pioneer in the development of the first intercom system for the proaudio industry. From communications to entertainm!ent, security to pedestrian tracking, HME\'s wireless and digital innovations are transforming many industries, including quick service restaurants, pro-audio, casinos and retail. As a privately held company, HME develops and delivers a comprehensive line of customer-driven solutions to over 70 countries worldwide.STRINGENT PACKINGWILL BE PROFESSIONALLY PACKED TO MAKE IT TO YOUIN THE SAME GREAT CONDITION
Please check out my other listings for more ProfessionalAudio, Video, Stage Lighting Equipment And More From Around Central Florida.
THANKS FOR LOOKING
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.