Generator Controller Auto Start Module HGM1790N 4 Stroke Engine For SmartGen

Key Points:

Type: Generator Control ModuleModel: HGM1790N

Engine Type: 4 Stroke

Fuel Type: Diesel, GasolinePower Source: Fuel PoweredRecommended Uses For Product: Commercial, ResidentialVoltage: 24 VoltsSpecial Feature: Remote StartColor: ‎BlackEngine Type: 4 StrokeIgnition System Type: ‎Electric startEngine Displacement: 418 Cubic Centimeters

Key Features:

Berliii

Generator Controller Auto Start Module HGM1790N 4 Stroke Engine For SmartGen

Key Points:

Type: Generator Control Module
Model: HGM1790N

Engine Type: 4 Stroke

Fuel Type: Diesel, Gasoline
Power Source: Fuel Powered
Recommended Uses For Product: Commercial, Residential
Voltage: 24 Volts
Special Feature: Remote Start
Color: ‎Black
Engine Type: 4 Stroke
Ignition System Type: ‎Electric start
Engine Displacement: 418 Cubic Centimeters

Key Features:

Pattern LCD display (with backlight), LED indicator, touch button operation;
The screen protection uses hard-screen acrylic materials;
Using silicone panels and buttons to adapt to high environmental and high temperature capabilities;
The power supply range is wide DC (8~35) V;
Collect and display single-phase voltage, current, frequency, power, and load percentage parameters: Power generation voltage V power generation frequency Hz; Power generation kW power generation current A; Load percentage %;
Various parameters of the precision acquisition engine: Oil pressure kPa temperature °C; Fuel level % cumulative running time H (up to 199999 hours); voltage V speed RPM; Cumulative boot times (up to 199999 times, displayed by the host computer);
Unit fault protection and display function;
The controller has 3 working modes: manual, automatic, and stop;
Multiple temperature, pressure and oil level sensors can be used directly and can customize parameters; temperature and pressure sensors can be separately and temperature, the pressure alarm is used in parallel to increase the primary protection while providing the analog quantity;
Multiple starting success conditions (speed, oil pressure, power generation frequency) can be selected;

1 programmable input port, which can be set as digital input or liquid level sensor;
2 relay fixed output ports (fuel output, start output);
3 programmable relay output ports, which can set public alarm output, preheat output or idle speed control output;
Parameter setting function: Allow users to change settings of their parameters, not lost when the system is powered off, most parameters of the controller can be adjusted from the front panel of the controller, and all parameters are adjusted by the PC through the USB interface (Type-B type);
All parameters are digitally adjusted to improve the reliability and stability of the whole machine;
Modular structure design, flame-retardant ABS shell, pluggable terminal block, embedded installation, compact structure and convenient installation.

Working Voltage: DC8. 0V to 35.0V. Continuous Power Supply
Power Consumption: <1.2W (Standby mode: s0.5W)
Alternator voltage Input: AC 15V -AC 30 V (ph-N)
Alternator Frequency: 5060Hz
Speed Sensor Voltage: 1.0V to 24V(RMS)
Speed Sensor Frequency: Max10KHz
Start Relay Output: 1Amp DC28V DC B+ power supply
Fuel Relay Output: 1Amp DC28V DC B+ power supply
Aux.Ouiput1: 1Amp DC28VDC B+ power supply
Aux.Output2: 1Amp DC28V DC B+ power supply
Aux.Ouitput3: 1Amp DC28V DC B+ power supply
Programmable input Digital: Active when connected to B-
Case Dimensions: 95mm × 86mm × 46.5mm
Panel Cutout: 78mm × 66mm
CT Secondary Current: Rated: 5A
Working conditions: Temperature: (-25-+70yC;Humidity:(20-93)%RH
Storage Condition: Temperature: (-25-+70yC
Protection Level: IP55: When waterproof rubber gasket installed between the controller and panel fascia.
insulation Intensity: Attach AC2.2kV voltage between AC high voltage terminal and low voltage terminal (leak current below 3mA in 1 minute).

Please check product compatibility carefully to ensure it is the product you need.
So as not to waste your time and energy on return.

Details:
HGM1790N genset controller is suit for single unit automation and monitoring control (also can be used for pumping unit). It can be started and stopped manually or via a remote start/stop signals. HGM1790N controller can supervise and protect genset operation by gathering and analyzing genset data like generate voltage, current, water temperature, oil pressure and so on, and graphical LCD monitor on the front panel displays fault conditions and provides effective alarm signals so as to do maintenance as soon as possible. Moreover, parameter threshold and delay value can be adjusted via front panel or USB port (communicated with PC software).

Package Including:
1 × HGM1790N Generator Control Module

as the picture

Item SpecificsCountry of Origin United StatesBrand findmallMPN BER663630Fuel Type Diesel, GasolineType Generator Control ModuleWarranty 1YearModel 鈥嶩GM1790NPower Source Fuel PoweredCustom Bundle NoBundle Description NoModified Item NoSpecial Feature Remote StartRecommended Uses For Product Commercial, ResidentialEngine Displacement 鈥� 418 Cubic CentimetersIgnition System Type 鈥嶦lectric startEngine Type 鈥�4 Stroke
Payment

We accept payment via Paypal,Google Pay,VISA,Master Card,American Express,Discover, Mastercard payment .

Shipping

We process your order within 3business day upon payment(note: NOT counting holidays or weekends).
International shipping also available.

Return & Refund

Please read the item description and check the pictures carefully before offerding. Return or refund is available if there's error in item description causing the item not fitting your need or the product you received is damaged or not working. In such cases, seller pays for all related shipping cost if any.
Returns are also acceptable if buyer purchased this by mistake and item still in good condition for reselling.

Contact Us

If you have any question or concern about your order, please feel free to contact us through . We will try our best to reply all messages, as quickly as possible.

response

We maintain high standards of excellenceand strive for 100% customer satisfaction! response is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative response, so that we can satisfactorily address your concerns.

Berliii

Home PageSearch Store Shop CategoryStore Home Suspension Lighting & Lamps◈Fog Lights◈Headlight◈Fog Lamps cover◈Turn Lights◈Brake Lights◈Truck Light Strip◈Moto Lighting & Lamps◈Others◈Tail Lights Carburetor◈Lawn Mowers Carburetor◈String Trimmers Carburetor◈Blower Carburetor◈Snow Blower Carburetor◈Saw Carburetor◈Tractor Carburetor◈Motorcycle Carburetor◈ATV Carburetor◈Automobile kits◈Intake Manifold Boot Boat◈Steering Shaft Pin◈Yacht Light◈Others Control Arms & Parts Auto Valve◈Pressure Relief Valve◈Air Idle Valve◈VVT Valve◈Transmission Solenoids◈Control Valve◈Valve Body◈EGR Valve◈Others Motorcycle Valve◈Motorcycle Solenoid Valve◈Motorcycle fuel Switch Valve◈Motorcycle Speed control Valve◈Others Fuel Injector Brakes & Brake Parts◈Brake Master Cylinder◈Clutch & Clutch Parts◈Motorcycle Hand Brake Handle◈Motorcycle Brake Cable◈Motorcycle Brake Pads◈Others Car Repair Kit Auto Engine System◈Valve Cover & Gasket◈Oil Cooler◈Engine Timing Cover◈Thermostat◈Oil Pan◈Automobile Heaters&Accessories◈Engine Coolant Recovery Tank◈Glow Plug◈Filter Housing &Accessories◈Engine Rocker Arm Shaft Sleeve◈Engine Hood◈Oil Scale◈Coolant Water Inlet Pipe◈Others Auto Ignition System◈Spark Plug◈Car Ignition Coil◈Spark Plug Protective Cover◈Ignition Switch◈Car Ignition◈Car Ignition Module◈Others Auto Hub◈Locking Hub◈Hub Bearing◈Wheel Spacers Adapters◈Others Motorcycle Ignition System◈Motorcycle Ignition◈Motorcycle Ignition Coil◈Motorcycle Fuel Switch◈Motorcycle Hand Plate◈Motorcycle Ignition Switch◈Motorcycle Starter Fitting◈Motor Electromagnetic Starter Motorcycle engine system◈Piston Cylinder Fittings◈Camshaft◈Others Auto Actuator◈Air Conditioner Actuator◈Door Lock Actuator◈Eccentric Shaft Actuator◈Hood Catch◈AC Blower Motor◈Clutch Actuator◈Fuel Door Opener Actuator◈Others Auto Motor◈Others Auto Inlet & Outlet System◈Air Filter◈Intake Exhaust Valves◈Throttle Body◈Exhaust And Intake Pipes◈Turbocharger◈Others Auto Circuit Wiring Harness◈Airbag Hairspring◈Positive Battery Cable◈Sensor Harness◈Body Wiring Harness◈Gear Shift Control Cable◈Battery Terminal◈Others Transmission Power Hose◈Others Auto Switch◈Door Power Window Switch◈Neutral Safety Switch◈Combination Lever Motorcycle Control System◈Gearbox Shift Regulator◈Thumb Oiler◈Others Auto Sensor◈TPMS Sensor◈Mass Air Flow Sensor◈Oxygen Sensor◈Knock (Detonation) Sensor◈Air Pressure Sensor◈Throttle Position Sensor (TPS)◈Vehicle Speed Sensor◈ABS Wheel Speed Sensor◈Fuel Pressure Sensor◈Crankshaft Position Sensor◈Oil Pressure Sensor◈Camshaft Position Sensor◈Ride Height Sensor◈PDC Sensor◈MAP Sensor◈Exhaust Pressure Sensor◈Coolant Temperature Sensor◈Acceleration Sensor◈Others Motorcycle Pump◈Fuel Pump◈Brake Calipers◈Others Auto Interior◈Plastic Rivets Fasteners◈Trunk Shield◈Sunroof Sunshade Corn◈Armrest Center Box Cover◈Cup Holder◈Inside Door Handle◈Inner Door Panel Handle◈Cigarette Lighter◈Storage Box◈Air Conditioner Vent◈Others Exterior Trimming Parts◈Roof Rack◈Running Boards/Side Steps◈Bmuper Grille◈Fender Flares◈Front Bumper Grille Guard◈Door Handle◈Fuel tank cap◈Hinge◈Front Bumper◈Rear Bumper◈Motorcycle Decoration◈Others◈Window Visors◈Windshield Wiper Blades Auto Pump◈Fuel Pump◈Water Pump◈High Pressure Fuel Pump◈Air Pump◈Power Steering Pump◈Clutch Master Cylinder◈Oil Pump◈Others Business & Industrial▷Hand Tools♢Balance Level♢Casters♢Drill Bits♢Hydraulic Crimper♢Outside Micrometer♢Rivet Supplies♢Flap Disc♢Hose Clamp♢Metal Cut Off Wheels♢Sanding Disc♢Welding Materials♢Interior Door Fittings♢Paint Sprayers▷Generator Accessories♢Automatic Voltage Regulator♢Others▷Industrial Control Module♢Control Valves♢Roller Bar♢Collet Chuck♢Drill Bits♢Drill Chuck♢Drill Chuck Arbors♢Live Center♢Milling Arbor♢Pull Stud♢Quick Change Tool Post♢Reamer♢Spring Collet♢Vise♢Others Radiators & Parts Golf Cart Parts & Accessories◈Golf car charger◈Other Home & Garden▷Lawn Mowers Parts♢Repair Kits♢Recoil Starter♢Ignition Coil♢Transmission System♢Lubrication System♢Air Parts♢Repair Kits♢Clutch & Trimmer Parts♢Repair Kits♢Trimmer Head♢Others◈Leafblower Parts◈Snowblower Parts◈Others OtherHot Item 44 Lbs Roll ER70S-6 .030\" (0.8 mm) Mild Steel MIG Welding Wire New USD 53.52 Carburetor For Briggs & Stratton V-Twin 20HP 21HP 22HP 23HP 24HP 25HP 699709 USD 16.54 8 Pack 3/4\" Garden Hose Quick Connect Water Hose Fit Brass Female Male Connector USD 18.50 11-lb Roll 2Pack ER70S-6 .030\" (0.8mm) Mild Steel MIG Welding Wire USD 47.25 For Router Fan Variable Speed Controller Electric Motor Rheostat AC 120V USD 11.56 Delivery

New List Item Dual Sliding Table SFU1605 Ballscrew 100mm Effective Linear ± 0.03mm Accuracy USD 54.69 1 Pair 38 Inch Locking Drawer Slides Full Extension & Lock 500 lbs Load Capacity USD 56.49 For V-Twin 20-25hp 791230 44P777 44R677 44Q777 406777 407777 445677 Carburetor USD 33.69 For V-Twin 20-25hp Model 44P777 44R677 44Q777 406777 407777 445677 Carburetor USD 35.25 919 Pcs Grade 8.8 Hex Bolt Nut Assortment M4 M5 M6 M8 Yellow Zinc Finish USD 46.40 Generator Controller Auto Start Module HGM1790N 4 Stroke Engine For SmartGen

Key Points:

Type: Generator Control Module
Model: HGM1790N

Engine Type: 4 Stroke

Fuel Type: Diesel, Gasoline
Power Source: Fuel Powered
Recommended Uses For Product: Commercial, Residential
Voltage: 24 Volts
Special Feature: Remote Start
Color: ‎Black
Engine Type: 4 Stroke
Ignition System Type: ‎Electric start
Engine Displacement: 418 Cubic Centimeters

Key Features:

Pattern LCD display (with backlight), LED indicator, touch button operation;
The screen protection uses hard-screen acrylic materials;
Using silicone panels and buttons to adapt to high environmental and high temperature capabilities;
The power supply range is wide DC (8~35) V;
Collect and display single-phase voltage, current, frequency, power, and load percentage parameters: Power generation voltage V power generation frequency Hz; Power generation kW power generation current A; Load percentage %;
Various parameters of the precision acquisition engine: Oil pressure kPa temperature °C; Fuel level % cumulative running time H (up to 199999 hours); voltage V speed RPM; Cumulative boot times (up to 199999 times, displayed by the host computer);
Unit fault protection and display function;
The controller has 3 working modes: manual, automatic, and stop;
Multiple temperature, pressure and oil level sensors can be used directly and can customize parameters; temperature and pressure sensors can be separately and temperature, the pressure alarm is used in parallel to increase the primary protection while providing the analog quantity;
Multiple starting success conditions (speed, oil pressure, power generation frequency) can be selected;

1 programmable input port, which can be set as digital input or liquid level sensor;
2 relay fixed output ports (fuel output, start output);
3 programmable relay output ports, which can set public alarm output, preheat output or idle speed control output;
Parameter setting function: Allow users to change settings of their parameters, not lost when the system is powered off, most parameters of the controller can be adjusted from the front panel of the controller, and all parameters are adjusted by the PC through the USB interface (Type-B type);
All parameters are digitally adjusted to improve the reliability and stability of the whole machine;
Modular structure design, flame-retardant ABS shell, pluggable terminal block, embedded installation, compact structure and convenient installation.

Working Voltage: DC8. 0V to 35.0V. Continuous Power Supply
Power Consumption: <1.2W (Standby mode: s0.5W)
Alternator voltage Input: AC 15V -AC 30 V (ph-N)
Alternator Frequency: 5060Hz
Speed Sensor Voltage: 1.0V to 24V(RMS)
Speed Sensor Frequency: Max10KHz
Start Relay Output: 1Amp DC28V DC B+ power supply
Fuel Relay Output: 1Amp DC28V DC B+ power supply
Aux.Ouiput1: 1Amp DC28VDC B+ power supply
Aux.Output2: 1Amp DC28V DC B+ power supply
Aux.Ouitput3: 1Amp DC28V DC B+ power supply
Programmable input Digital: Active when connected to B-
Case Dimensions: 95mm × 86mm × 46.5mm
Panel Cutout: 78mm × 66mm
CT Secondary Current: Rated: 5A
Working conditions: Temperature: (-25-+70yC;Humidity:(20-93)%RH
Storage Condition: Temperature: (-25-+70yC
Protection Level: IP55: When waterproof rubber gasket installed between the controller and panel fascia.
insulation Intensity: Attach AC2.2kV voltage between AC high voltage terminal and low voltage terminal (leak current below 3mA in 1 minute).

Please check product compatibility carefully to ensure it is the product you need.
So as not to waste your time and energy on return.

Details:
HGM1790N genset controller is suit for single unit automation and monitoring control (also can be used for pumping unit). It can be started and stopped manually or via a remote start/stop signals. HGM1790N controller can supervise and protect genset operation by gathering and analyzing genset data like generate voltage, current, water temperature, oil pressure and so on, and graphical LCD monitor on the front panel displays fault conditions and provides effective alarm signals so as to do maintenance as soon as possible. Moreover, parameter threshold and delay value can be adjusted via front panel or USB port (communicated with PC software).

Package Including:
1 × HGM1790N Generator Control Module

as the picture

Payment

We accept payment via Paypal,Google Pay,VISA,Master Card,American Express,Discover, Mastercard payment .

Shipping

We process your order within 3business day upon payment(note: NOT counting holidays or weekends).
International shipping also available.

Return & Refund

Please read the item description and check the pictures carefully before offerding. Return or refund is available if there's error in item description causing the item not fitting your need or the product you received is damaged or not working. In such cases, seller pays for all related shipping cost if any.
Returns are also acceptable if buyer purchased this by mistake and item still in good condition for reselling.

Contact Us

If you have any question or concern about your order, please feel free to contact us through . We will try our best to reply all messages, as quickly as possible.

response

We maintain high standards of excellenceand strive for 100% customer satisfaction! response is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative response, so that we can satisfactorily address your concerns.

All rights reserved.

On Nov 6, 2026 at 17:16:09 PST, seller added the following information: