Front Rear Shocks Struts For 2000-2003 Mazda Protege 2002-2003 Protege 5

Front Rear Shocks Struts For 2000-2003 Mazda Protege 2002-2003 Protege 5

Fitment:

• 2000-2003 Mazda Protege From Production Date 08-2000
• 2002-2003 Mazda
• Ensure precise fit and easy installation.
• 100% brand new, tested to meet or exceed OEM specifications.
• Offers exceptional durability and is backed by an industry-leading warranty.
• These are brand new, unused or discarded parts.
• Each complete assembly is manufactured to meet or exceed precise OEM specifications.
• High corrosion resistance and long service life. The steel bars are mirco polished with double chrome plates.
• The new valve technology operates in stages according to the speed of the car.
• Strictly produced according to the standard, the thickness of the product steel is thicker than the ordinary one, and the quality and stability of the product are better.

Package Include:

• 4X Shocks Struts??Front Rear Left Right????

We'll ship the struts separately in two pakages if the full set is over weight. Notice please

HOW TO INSTALL :

• Step 1: Before you lift the vehicle, loosen lug nuts one full turn.
• Step 2: Jack up vehicle and use jack stands for safety & remove the tire from the rotor.
• Step 3: (Wheel alignment is necessary after strut replacement.) Marking the position of all the bolts will help
• keep the alignment close to original and save time aligning. Use a colored pencil to mark the old strut on the bolt.
• Step 4: Use penetrating oil (such as WD40) to coat any rusted fasteners, let soak for approximately 1 hour.
• Step 5: (Optional) While waiting for oil to soak, take this time to inspect all other components that may need
• replacement (brake pads, rotors, brake hoses, ball joints, CV boots, tie rod ends, bushings, sway bars, etc).
• Step 6: Remove any brake line or wire attachments from the strut body. Do not disconnect brake lines (if possible)!
• Opening brake lines will require bleeding of the brake system.
• Use extreme caution when removing brake lines from your struts, as any damage to your brake line can result in
• expensive and time consuming repairs.
• Step 7: Remove sway bar attached to the strut assembly or control arm.
• Step 8: Remove the tie rod (only if it attached to the body of the strut, if not leave it attached to the steering knuckle).
• Step 9: Remove the strut to knuckle bolts at the bottom of the strut. On some vehicles, the brake caliper and rotor
• may need to be removed to gain access.
• Step 10: Remove the upper mounting plate bolts located in the engine or trunk compartment. Do not remove the
• center retaining nut! It is not safe to unload the spring from the assembly in this position.
• Step 11: Carefully remove the old strut assembly from the vehicle. Be very cautious not to let the strut "drop" down
• on your brake line, rotor or drum.
• Step 12: Install the new Complete Strut Assembly in the reverse order as above (steps 11-6). Using an anti-seize
• compound on all fasteners is suggested.
• Step 13: Carefully double check your work and make sure everything is tightened to manufacturers torque specifications.
• Step 14: Replace the tire the rotor and tighten to manufacturers torque specifications.
• Step 15: Slowly lower the vehicle down after removing the jack stands. Pay very close attention to any odd sounds
• when the vehicle is lowered onto the new Complete Strut Assemblies.
• Step 16: It is very important that you immediately "road test" your vehicle right away to ensure that installation was done properly.
• Listen and feel for common signs of incorrect installation while driving slowly over speed bumps, rough road or potholes.

Seller Guarantee

• 100% Bran-new and Good Quality
• Item Located: United State
• Handling time: 3 working Day
• 30 Days Money Back + 1 Years Warranty

Welcome to
Item SpecificsBrand ShocksStrutsManufacturer Part Number SS800032S01Type StrutFitment Type Direct ReplacementPlacement on Vehicle Left Right Front RearManufacturer Warranty 1 YearFeatures SealedModified Item NoAdjustable NoGas Charged Shock YesInterchange Part Number 333350 ,333351 ,333276 ,333277Other Part Number 71424 ,71425 ,71588 ,71589Kit or Single Part KitKit Parts Included Set of two front struts and two rear strutsSurface Finish Powder CoatOE Spec or Performance/Custom OE SpecColor Gloss BlackReturn Policy Free return or replacement within 30 daysShock Absorber System Double PipeShock Absorber Type GasVintage Part NoMaterial SteelMounting Style Screw-OnPerformance Part NoQuantity 4PcsSuperseded Part Number Shock and StrutUniversal Fitment NoCompressed Length 12.990"(F),15.000"(R)Travel Length 7.090"(F),8.375"(R)Included Hardware Mounting HardwareItem Length 20.080"(F),23.375"(R)Package Dimension (in.) 18.9*14.17*7.09 (F), 18.9*13.39*6.69 (R)Gross Weight (LB) 41.579Package Dimension (in.) 18.9*14.17*7.09 (F), 18.9*13.39*6.69 (R)Gross Weight (LB) 41.579
Payment 1.The note there will NOT be read. If you want to change the shipping address, please contact us by messages.2.If you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.3.Payment must be received within 10 days as sale ended or order might be delayed.Shipping Product will be shipped within 3 business days after full payment is received and verified. Delivery Time is about 3-7 business days to most of countries.All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days.Please tell us your shipping address if it is different from the one in .The tracking number will be given for the customer to check the shipping status online (registered or faster service only).We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on during checkout.Returns

• • Westandbehindeveryproductwesell.

Front Rear Shocks Struts For 2000-2003 Mazda Protege 2002-2003 Protege 5

Fitment:

• 2000-2003 Mazda Protege From Production Date 08-2000
• 2002-2003 Mazda
• Ensure precise fit and easy installation.
• 100% brand new, tested to meet or exceed OEM specifications.
• Offers exceptional durability and is backed by an industry-leading warranty.
• These are brand new, unused or discarded parts.
• Each complete assembly is manufactured to meet or exceed precise OEM specifications.
• High corrosion resistance and long service life. The steel bars are mirco polished with double chrome plates.
• The new valve technology operates in stages according to the speed of the car.
• Strictly produced according to the standard, the thickness of the product steel is thicker than the ordinary one, and the quality and stability of the product are better.

Package Include:

• 4X Shocks Struts??Front Rear Left Right????

We'll ship the struts separately in two pakages if the full set is over weight. Notice please

HOW TO INSTALL :

• Step 1: Before you lift the vehicle, loosen lug nuts one full turn.
• Step 2: Jack up vehicle and use jack stands for safety & remove the tire from the rotor.
• Step 3: (Wheel alignment is necessary after strut replacement.) Marking the position of all the bolts will help
• keep the alignment close to original and save time aligning. Use a colored pencil to mark the old strut on the bolt.
• Step 4: Use penetrating oil (such as WD40) to coat any rusted fasteners, let soak for approximately 1 hour.
• Step 5: (Optional) While waiting for oil to soak, take this time to inspect all other components that may need
• replacement (brake pads, rotors, brake hoses, ball joints, CV boots, tie rod ends, bushings, sway bars, etc).
• Step 6: Remove any brake line or wire attachments from the strut body. Do not disconnect brake lines (if possible)!
• Opening brake lines will require bleeding of the brake system.
• Use extreme caution when removing brake lines from your struts, as any damage to your brake line can result in
• expensive and time consuming repairs.
• Step 7: Remove sway bar attached to the strut assembly or control arm.
• Step 8: Remove the tie rod (only if it attached to the body of the strut, if not leave it attached to the steering knuckle).
• Step 9: Remove the strut to knuckle bolts at the bottom of the strut. On some vehicles, the brake caliper and rotor
• may need to be removed to gain access.
• Step 10: Remove the upper mounting plate bolts located in the engine or trunk compartment. Do not remove the
• center retaining nut! It is not safe to unload the spring from the assembly in this position.
• Step 11: Carefully remove the old strut assembly from the vehicle. Be very cautious not to let the strut "drop" down
• on your brake line, rotor or drum.
• Step 12: Install the new Complete Strut Assembly in the reverse order as above (steps 11-6). Using an anti-seize
• compound on all fasteners is suggested.
• Step 13: Carefully double check your work and make sure everything is tightened to manufacturers torque specifications.
• Step 14: Replace the tire the rotor and tighten to manufacturers torque specifications.
• Step 15: Slowly lower the vehicle down after removing the jack stands. Pay very close attention to any odd sounds
• when the vehicle is lowered onto the new Complete Strut Assemblies.
• Step 16: It is very important that you immediately "road test" your vehicle right away to ensure that installation was done properly.
• Listen and feel for common signs of incorrect installation while driving slowly over speed bumps, rough road or potholes.

Seller Guarantee

• 100% Bran-new and Good Quality
• Item Located: United State
• Handling time: 3 working Day
• 30 Days Money Back + 1 Years Warranty

Welcome to

PaymentShippingReturnsresponse 1.The note there will NOT be read. If you want to change the shipping address, please contact us by messages.2.If you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.3.Payment must be received within 10 days as sale ended or order might be delayed. Product will be shipped within 3 business days after full payment is received and verified. Delivery Time is about 3-7 business days to most of countries.All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days.Please tell us your shipping address if it is different from the one in .The tracking number will be given for the customer to check the shipping status online (registered or faster service only).We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on during checkout.

• • Westandbehindeveryproductwesell.

All rights reserved.