|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Ford Racing Fits M-6010-BOSS50 5.0L Cast Iron BOSS Engine Block
$3,276.88

The Ford Racing M-6010-BOSS50 BOSS 5.0L engine block is a cast iron modular block designed for high-performance and competition engine builds. It features a 4.6L deck height, a 3.70-inch cylinder bore, and a 4-bolt main configuration to support demanding applications. Ford Racing uses a proprietary iron blend intended to provide strong casting integrity, reduced porosity, and consistent material quality throughout the block. The BOSS modular block is supplied with a rough-honed cylinder bore and does not include a finished, milled head deck surface. Additional machining and preparation are required before assembly, allowing the builder to complete the block according to the intended combination, clearances, and performance requirements. Professional engine machining and assembly are recommended to ensure proper fitment and reliable operation. For installation in 2005-2010 Mustangs, use the M-6031-BOSS50 mount adapter as required for the vehicle and engine configuration. This Ford Racing block is intended for competition use only and should not be installed in a vehicle operated on public roads or highways. Installation in a street-driven vehicle may violate applicable U.S. and Canadian emissions laws and regulations. Verify application requirements, machining specifications, and local regulations before beginning installation.
- Competition-use component for modular engine builds
- Requires final machining before Racing M-6010-BOSS50 BOSS 5.0L modular cast iron engine block
- 4.6L deck height for modular engine applications
- 3.70-inch cylinder bore supplied rough honed
- 4-bolt main design for performance-oriented builds
- Proprietary iron blend developed for casting strength and consistency
- Unfinished head deck surface requires final milling
- M-6031-BOSS50 mount adapter required for installation in 2005-2010 Mustangs
- Designed for competition use only and not intended for public-road vehicles

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|