For Dometic Refrigerator Control Board Kit 3316348. 900 Power Module Board
$128.25

3316348.900 3316348900 RV Refrigerator/Fridge Power Module Board
Application:
For most Dometic RV Refrigerator/ Fridge models:
For DM Series: DM2652; DM2662; DM2663; DM2852; DM2862; DM3862;
For NDM Series: NDM1062; NDR1062; RM2351;
For RM Series: RM2354; RM2451; RM2454. RM2551; RM2554; RM2620; RM2662; RM2820; RM2852; RM2862.
Vehicle compatibility charts are for REFERENCE ONLY. Check your vehicle with OEM below to match your needs.
OE Number:
3316348.900 / 3316348900
Package Including:
1x Power Module Board
Specification:
Replacement part number: 3316348900, 3316348.000, 3316348000, 0713814221829.
Our power supply module board is made of high quality material, excellent moisture resistance, stable performance and
durable.
Our 3316348.900 power module/Circuit board with an integrated propane function igniter.
This is a replacement lower control board for gas absorption refrigerators.
The lower control board is the main circuit board on the refrigerator and controls the ignition and operation of the
propane, as well as power to the AC components.
Our 3316348.900Rv Refrigerator power module board /Control Board with power supplies of: 120V, 3.5A,60Hz and 12VDC, 1.9A.
Fuse back cover description:
P1: connected to upper control board,
P2: thermistor,
P3: connected to gas valve,
J2: connected to indoor lighting/climate control,
J4: positive 12V DC from terminal block,
J5: AC line voltage (black),
J6: AC neutral (white), J7: AC neutral output to AC heater,
J8: AC line output to AC heater switch side,
J10: negative to chassis ground.
If your RV refrigerator is not working, our products will give your refrigerator a new look and refrigerate your food when
the hot summer days come!
Our power supply module board is made of high quality material, excellent moisture resistance, stable performance and
durabl.
Replacing 3316348.900 Power Module Board Instructions:
Please disconnect 120VAC and 12V DC before replacement.
TOOLS: flat blade screwerdriver
Step1
a.remove the top mounting screw and discard.
b.remove the cover using a flat blade screwerdriver. Follow the instructions for removal that are molded the cover.
Step2
a.disconnecte the module wiring by referring to the wiring diagram on the back of the refrigerator.
b.remove the bottom mounting screw and discard . Then carefully remove the unit from the refrigerator
Step3
a.Secure the unit base to the refrigerator using the provided mounting screw.
b.reinstall the wiring according to the wiring diagram on the back of the refrigerator.
c.Snap the power/control module cover to the base.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.