How to Replace a Coolant ReservoirMaterials Needed - Combination wrench set and extensions
- Coolant collection pan
- Flat head screwdriver
- Funnel
- Locking pliers
- New coolant
- Replacement coolant reservoir and clips
- Safety equipment including safety glasses and gloves
- Socket wrench set
- WD-40or other penetrating oil
- Work light
-
- Note: The replacement coolant reservoir will vary according to different makes and models.
-
For 2008 2009 2010 2011 2012 2013-2017 Mack CHU Radiator Coolant Overflow Tank
How to Replace a Coolant Reservoir
Materials Needed
- Combination wrench set and extensions
- Coolant collection pan
- Flat head screwdriver
- Funnel
- Locking pliers
- New coolant
- Replacement coolant reservoir and clips
- Safety equipment including safety glasses and gloves
- Socket wrench set
- WD-40or other penetrating oil
-
Work light
-
Tip: Anytime you work on the coolant system, the potential of being burned is very high. Coolant can maintain a temperature near boiling for a very long time and will burn your skin if exposed. This job should only be completed when the engine is cold and has not been running for a minimum of one hour. Make sure you wear safety glasses and gloves to protect your hands from hot coolant if the engine is not cold.
Part 1 of 3: Diagnosing a problem with the coolant reservoir
Noted below are a few of the warning signs that will alert you that the coolant reservoir is damaged and needs to be replaced.
Coolant is leaking under the motor: If you notice that there is coolant or what appears to be colored water under your vehicle, specifically under the passenger side engine compartment, this could be an indication that the coolant reservoir is damaged.
Low coolant or engine overheating: When the radiator coolant level is actually low, air pockets may develop inside the coolant lines. This will typically create an overheating situation. In many cases, thelow level of coolantis due to evaporation or a leak in the system. Check the radiator and coolant lines to verify they are not the cause of the leak before you replace the coolant reservoir.
Part 2 of 3: Remove and replace the coolant reservoir
Step 1: Prepare the vehicle. The coolant reservoir is located on top of the engine compartment, and in some cases, may be tucked below.
Step 2: Spray WD-40 on any rusted bolts. There are only a few bolts that secure the coolant reservoir to the engine 3: Locate the coolant reservoir. The coolant reservoir should be located on the top of the engine compartment, typically on the passenger side.
Step 4: Remove the bolts securing the reservoir to the engine compartment. On most US and foreign vehicles, there will be one or two bolts on the front of the reservoir that attacing it.
Step 5: Remove the two top hoses. There are two hoses on top of the coolant reservoir that need to be removed next.
Step 6: Pry the hoses off the reservoir tank fittings. Once the clamps have been moved back onto the hose, you'll need to use a very thin, flat head screwdriver to pry the hose clamps off the 7: Remove the bottom coolant hose. On the bottom of the tank , there is a larger circumference coolant hose that runs to the 8: Pry the hose off the bottom fitting. Do this as instructed above with top fitting.
Step 9: Remove rear clip from coolant reservoir. On most coolant reservoirs, there will be a clip that secures the reservoir to the rear of the engine compartment.
Step 10: Remove the old coolant reservoir from the engine compartment.
Step 11: Clean the area underneath the old coolant reservoir. Since the old reservoir is gone, this is a good opportunity to clean any coolant, debris, dirt or gunk that may be under that area.
Step 12: Reinstall the new tank. Before you reinstall the new coolant reservoir, make sure to visually verify that the new tank is the same shape, size, and has the same fittings as the older tank.
Step 13: Attach bottom hose to coolant reservoir. The bottom hose needs to be installed before trying to secure the tank to the engine compartment.
Step 14: Slide clamps onto the hose and fitting. Using a pair of pliers, close the teeth of the clamp and slide the clamp to the base of the tank and release the pliers to close the clamp securely.
Step 15: Reattach two top hoses. Utilizing the same process as indicated in step 11 and 12, secure the left and right top hoses to the new coolant reservoir.
Step 16: Snap new tank onto rear clamp fitting. This step is for those that have a reservoir tank that has a clamp attachment as displayed in the image above.
Step 17: Secure coolant reservoir. Secure with bolts to the engine 18: Fill coolant reservoir. Each manufacturer has individual recommendations on the type of coolant that should be used as well as how high to fill the reservoir.
Step 19: Check with manufacturer about priming coolant system. In some cases, your vehicles coolant system will need to be primed to avoid bubbles or air pockets inside the coolant lines. Make sure to check with your vehicle manufacturer if this is the case and prime the system as recommended before starting the vehicle.
Part 3 of 3: Test drive the vehicle
Step 1: Start the vehicle. Let it warm up to operating temperature.
Step 2: Check for any leaks. Look for leaks from the coolant reservoir or coolant lines attached.
Step 3: Check to see if the check engine or low coolant level light is illuminated. If it is, turn off the engine and check the coolant level inside the reservoir.
Step 4: Make sure to drive the vehicle until you hear the radiator fan come on. Once you do, return home while keeping an eye on the thermostat or engine temperature.
Step 5: Check coolant level. Once the vehicle has cooled for a minimum of one hour, check the coolant level inside the reservoir and fill if needed.
Item SpecificsBrand :appPackaging Type :BoxManufacturer Part Number :APP115560S01Manufacturer Warranty :One YearMain Color :WhiteMaterial :PlasticQuantity :1PCInterchange Part Number :20968795, 21000194, 21038101OE/OEM Part Number :21067134, 21074555, 21074569Superseded Part Number :21314361, 21513975, 21846997Package Contents :1 Coolant Reservoir, 1 CapPlacement on Vehicle :FrontOE Spec or Performance/Custom :OE SpecCap Included :YesMounting Hardware Included :NoInstall Type :Direct ReplacementMount Hole Quantity :1Pressurized :NoHeight :190 mm
1.Weacceptmultiplepayment methods.2.The note there will NOT be read. If you want to change the shipping address, please contact us by messages.3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)4.Payment must be received within 10 days as sale ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as sale ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as sale ended or order might be delayed.1.We only accept PayPal.2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by messages.3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)4.Payment must be received within 10 days as sale ended or order might be delayed.
1. Orders processed within 24 hours of payment verification.
2. We accept all payment
3. The images shown are not the actual item and are for your reference only.
4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
1.We stand behind every product we sell.
2.All of our brand new items come with a 30-Days money-back guarantee.
We maintain high standards of excellence and strive for 100% customer satisfaction! response IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give usresponse, so that we can satisfactorily address your concerns.
For 2008 2009 2010 2011 2012 2013-2017 Mack CHU Radiator Coolant Overflow Tank
How to Replace a Coolant Reservoir
Materials Needed
- Combination wrench set and extensions
- Coolant collection pan
- Flat head screwdriver
- Funnel
- Locking pliers
- New coolant
- Replacement coolant reservoir and clips
- Safety equipment including safety glasses and gloves
- Socket wrench set
- WD-40or other penetrating oil
-
Work light
-
Tip: Anytime you work on the coolant system, the potential of being burned is very high. Coolant can maintain a temperature near boiling for a very long time and will burn your skin if exposed. This job should only be completed when the engine is cold and has not been running for a minimum of one hour. Make sure you wear safety glasses and gloves to protect your hands from hot coolant if the engine is not cold.
Part 1 of 3: Diagnosing a problem with the coolant reservoir
Noted below are a few of the warning signs that will alert you that the coolant reservoir is damaged and needs to be replaced.
Coolant is leaking under the motor: If you notice that there is coolant or what appears to be colored water under your vehicle, specifically under the passenger side engine compartment, this could be an indication that the coolant reservoir is damaged.
Low coolant or engine overheating: When the radiator coolant level is actually low, air pockets may develop inside the coolant lines. This will typically create an overheating situation. In many cases, thelow level of coolantis due to evaporation or a leak in the system. Check the radiator and coolant lines to verify they are not the cause of the leak before you replace the coolant reservoir.
Part 2 of 3: Remove and replace the coolant reservoir
Step 1: Prepare the vehicle. The coolant reservoir is located on top of the engine compartment, and in some cases, may be tucked below.
Step 2: Spray WD-40 on any rusted bolts. There are only a few bolts that secure the coolant reservoir to the engine 3: Locate the coolant reservoir. The coolant reservoir should be located on the top of the engine compartment, typically on the passenger side.
Step 4: Remove the bolts securing the reservoir to the engine compartment. On most US and foreign vehicles, there will be one or two bolts on the front of the reservoir that attacing it.
Step 5: Remove the two top hoses. There are two hoses on top of the coolant reservoir that need to be removed next.
Step 6: Pry the hoses off the reservoir tank fittings. Once the clamps have been moved back onto the hose, you'll need to use a very thin, flat head screwdriver to pry the hose clamps off the 7: Remove the bottom coolant hose. On the bottom of the tank , there is a larger circumference coolant hose that runs to the 8: Pry the hose off the bottom fitting. Do this as instructed above with top fitting.
Step 9: Remove rear clip from coolant reservoir. On most coolant reservoirs, there will be a clip that secures the reservoir to the rear of the engine compartment.
Step 10: Remove the old coolant reservoir from the engine compartment.
Step 11: Clean the area underneath the old coolant reservoir. Since the old reservoir is gone, this is a good opportunity to clean any coolant, debris, dirt or gunk that may be under that area.
Step 12: Reinstall the new tank. Before you reinstall the new coolant reservoir, make sure to visually verify that the new tank is the same shape, size, and has the same fittings as the older tank.
Step 13: Attach bottom hose to coolant reservoir. The bottom hose needs to be installed before trying to secure the tank to the engine compartment.
Step 14: Slide clamps onto the hose and fitting. Using a pair of pliers, close the teeth of the clamp and slide the clamp to the base of the tank and release the pliers to close the clamp securely.
Step 15: Reattach two top hoses. Utilizing the same process as indicated in step 11 and 12, secure the left and right top hoses to the new coolant reservoir.
Step 16: Snap new tank onto rear clamp fitting. This step is for those that have a reservoir tank that has a clamp attachment as displayed in the image above.
Step 17: Secure coolant reservoir. Secure with bolts to the engine 18: Fill coolant reservoir. Each manufacturer has individual recommendations on the type of coolant that should be used as well as how high to fill the reservoir.
Step 19: Check with manufacturer about priming coolant system. In some cases, your vehicles coolant system will need to be primed to avoid bubbles or air pockets inside the coolant lines. Make sure to check with your vehicle manufacturer if this is the case and prime the system as recommended before starting the vehicle.
Part 3 of 3: Test drive the vehicle
Step 1: Start the vehicle. Let it warm up to operating temperature.
Step 2: Check for any leaks. Look for leaks from the coolant reservoir or coolant lines attached.
Step 3: Check to see if the check engine or low coolant level light is illuminated. If it is, turn off the engine and check the coolant level inside the reservoir.
Step 4: Make sure to drive the vehicle until you hear the radiator fan come on. Once you do, return home while keeping an eye on the thermostat or engine temperature.
Step 5: Check coolant level. Once the vehicle has cooled for a minimum of one hour, check the coolant level inside the reservoir and fill if needed.
Item SpecificsBrand :appPackaging Type :BoxManufacturer Part Number :APP115560S01Manufacturer Warranty :One YearMain Color :WhiteMaterial :PlasticQuantity :1PCInterchange Part Number :20968795, 21000194, 21038101OE/OEM Part Number :21067134, 21074555, 21074569Superseded Part Number :21314361, 21513975, 21846997Package Contents :1 Coolant Reservoir, 1 CapPlacement on Vehicle :FrontOE Spec or Performance/Custom :OE SpecCap Included :YesMounting Hardware Included :NoInstall Type :Direct ReplacementMount Hole Quantity :1Pressurized :NoHeight :190 mm
1.Weacceptmultiplepayment methods.2.The note there will NOT be read. If you want to change the shipping address, please contact us by messages.3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)4.Payment must be received within 10 days as sale ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as sale ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as sale ended or order might be delayed.1.We only accept PayPal.2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by messages.3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)4.Payment must be received within 10 days as sale ended or order might be delayed.
1. Orders processed within 24 hours of payment verification.
2. We accept all payment
3. The images shown are not the actual item and are for your reference only.
4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
1.We stand behind every product we sell.
2.All of our brand new items come with a 30-Days money-back guarantee.
We maintain high standards of excellence and strive for 100% customer satisfaction! response IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give usresponse, so that we can satisfactorily address your concerns.
Copyright ofapp_autoparts. All rights reserved.
Shop CategoryStore Home Lift supports starter wheel hub bearing wheel lug nuts Oxygen Sensors Iphone Case ignition coil Fuel Pump wheel spacer Alternators Brake Rotors&Pads Towing Mirrors Window Regulator Mass Air-Flow Sensor Leveling Lift Kit Car CV axle Window switch Window regulator Fuel injectors Coilover Thermostat Housing Radiator Coolant Tank ABS Wheel Sensor Regulator Rectifier Knock Sensor Parking sensor Crankshaft Position Sensor Camshaft Position Sensor MAP Sensor Oil Pressure Sensor Throttle Position Sensor Catalytic Converter Steering Rack Engine Mount Harmonic Balancer Car Carburetor Height Level Sensor Temperature Sensor Driveshaft Rear wheel axle LED headlight Assembly Throttle Body Tire Pressure Sensor Brake Pad Sensors water Pump Impeller Sensor-8 transmission filter transmission kit CV Axle Bumper Tonneau Cover Nerf bars Spoiler Wing Fender flares Front bumper lip vehicle speed sensor Hub Caps Pillar Posts cargo cover winch Roof Rack Tonneau cover Window Visor AC Compressor Cylinder Head Gasket Sets car tool Intake Manifold Shocks & Struts Timing Chain Kit Power Steering Pump Timing Belt Kit Water Pump Air Suspension steering knuckle-7 Air Horn Complete Struts Transfer Case Shift Motor Air suspension valve solenoid Jake Stand Brake Calipers Suspension+Strut+Bearing snorkel kit Bed Step Adj. Control Arm Steering Shaft Dipstick Strut Mount Mud Flaps Trailer Tools Series Coil Springs Spark Plug Brake System Parts◈Brake Calipers◈Brake Drums & Brake Shoes◈Brake Pads & Brake Shoes Air Cleaner Filter Box Air Dryer Power Brake Booster Leaf Spring Shackle Kit Lawn Mower Parts Weatherstrip Seal Cylinder Piston Kits OtherHot Item Pair Tow Mirrors For 03-07 Chevy Silverado GMC Sierra Power Heated Signal USD 128.99 For Freightliner Argosy 7.2L 2000 2001 Turbo Turbocharger 3802290 USD 135.90 For 99-07 Ford F250 F350 F450 F550 Power Heated Smoke Signal Towing Mirrors Pair USD 119.59 Upstream Downstream for Accord Honda 2.3L 98-2002 O2 02 Oxygen Sensor 2pcs USD 22.59 2x Front Hood Gas Lift Supports Shocks Struts Springs For 2002-2010 Dodge Ram USD 17.51 Picture
New List Item Trunk Rear Cargo Cover Security Shade Retractable For Kia Sportage 2023 2.5L EX USD 84.66 2X 20mm thick 5x4.75 12x1.5 Studs Wheel Spacer Fits Chevy Blazer 2000 1987-2005 USD 40.99 For Kia Sorento 2016-2019 Trunk Cargo Cover Security Shade Retractable Shield USD 70.66 Rear Wheel Hub Bearing Assembly For Toyota Prius 2010-2013 2014 2015 w/ ABS Base USD 47.99 2 Pcs Front Wheel Hub Bearings Fits Buick Century Chevrolet Impala Buick Regal USD 68.99 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.