Flite test simple scout 3d printed kit
I designed all these pieces for the flite test simple scout
11/12/25
Battery tray slightly revised for improved strength
Comes with
MOTOR MOUNT X1
JIG FOR MOTOR MOUNT X1
BATTERY TRAY X1
Motor mount is for 19mmx25mm pattern (direct mount) in my use flash hobby 3530 1100kv or similar
Jig is for drilling holes for bamboo skewers, there are 2 holes / skewers that hold Motor mount - horizontally
Jig slides in from the front on the nose of the simple scout
Battery tray was made for ovonic 3s 2200mah
Velcro goes where Battery sits and an additional strap wraps around. Use 3/4 inch hook and loop for this. There are holes to feed it through both sides.
Make sure you feed the loop through before gluing in the battery tray.
I have installed and flown this kit on 2 simple scouts and they work great.
Both fly without landing gear.
Holes are designed for 4mm (thick) bamboo skewers
UPDATE: AS OF 8/28/25
MOTOR MOUNTS ARE NOW PRINTED IN PETG
FOR MARGINALY BETTER HEAT RESISTANCE
Petg color: black
All other pieces will still be white pla

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.