Fleece Performance 07.5-24 Dodge RAM 6.7L Cummins Cold Weather Upgrade Kit - FPE-CUMM-IAH-X2
Brand: Fleece Performance
ManufacturerPart: FPE-CUMM-IAH-X2
Product Category: Engine Components~Intake Manifolds
Length: 6.8 inches
Width: 5.5 inches
Height: 2.4 inches
Weight: 0.7 lbs
The Fleece Performance FPE-CUMM-IAH-X2 Cold Weather Upgrade Kit fits select 6.7L Cummins applications, including Dodge Ram and Ram 2500 and 3500 trucks from the specified model years. Designed as an add-on for the Fleece Performance intake and grid heater kit, this system helps improve cold-weather engine startability by adding targeted heat to the intake air stream. It is intended for drivers who need dependable starting performance in severe winter conditions.
The optimized heater design and placement deliver efficient intake air heating while using lower wattage than comparable grid heating kits. This helps reduce strain on the grid heater relay while supporting consistent cold-weather operation. With the recommended dual-heater configuration, testing demonstrated startability down to -35°C, or approximately -31°F, when used with a functioning block heater and sufficiently charged 12-volt batteries. Actual results may vary based on battery condition, oil viscosity, ambient temperature, engine condition, and installation.
The kit includes a 700-watt heater, high-flex heater cable, and installation hardware. For recommended operation, a single heater is listed for temperatures down to approximately 23°F, while the cold-weather dual-heater configuration is listed for temperatures as low as -31°F. This product is designed for use with the applicable Fleece Performance intake and grid heater setup and is not presented as an OEM component or manufacturer-approved replacement. Verify vehicle and intake system compatibility before installation. Professional installation is recommended for proper routing, electrical connections, and safe operation.
This automotive product is not CARB approved and may not be legal for use on pollution-controlled vehicles in all locations. Check applicable federal, state, and local regulations before purchase or installation. Fleece Performance and part number FPE-CUMM-IAH-X2 are used for product identification and compatibility reference Weather Starting: Helps improve engine startability in severe cold when used with the applicable Fleece Performance intake and grid heater kit
Efficient Intake Heating: Optimized heater placement directs heat into the intake air stream for effective cold-weather performanceLower Electrical Load: Provides comparable heating performance with lower wattage to help reduce strain on the grid heater relayHeater Output: Includes a 700-watt heater suitable for the recommended cold-weather configurationComplete Installation Components: Includes high-flex heater cable and installation hardwareVehicle Compatibility: Fits select Dodge Ram and Ram 2500 and 3500 trucks equipped with a 6.7L Cummins engineSevere Cold Capability: Recommended dual-heater configuration supports testing down to approximately -31°F under specified conditions
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.