|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Erhardt+Glimer FR 5001 - Infrared Edge Position Sensor - K9686 -
$207.30

Erhardt+Leimer FR 5001 - Infrared Edge Position Sensor - K9686 - Usato - Condizioni Ottime ( Vedi Foto ) - Tolto da Macchinario Funzionante Prima della sua Dismissione - Completo del Manuale che Vedete in Foto - Perfetto - // Used - Excellent Condition (See Photos) - Removed from Working Machinery Before its Disposal - Complete with the Manual You See in the Photos - Perfect -Features:Measuring Range of ±10 mmResolution of 512Outputs Web Edge Position ValueThe Erhardt+Leimer FR5001 / FR5021 Infra-Red Edge Sensors operates on a light-sensitive barrier principle and uses an infra-red LED as light source. This infra-red LED projects light onto the micro-prism reflector located behind the web via a mirror. The reflector reflects back the light according to a retroreflecting principle, depending on how far the web covers the measuring range. The reflected light is reflected onto the CCD array via the telecentric optical unit. The CCD elements can cope with a higher signal level when thus illuminated. The signal is converted in the microprocessor into an output value proportional to the position of the web edge and conveyed to the CAN bus. This output value can be used to e.g. trigger a digital web controller. At the same time, the current web position in the measuring range is indicated on the LED strip display. Caratteristiche:Campo di misura di ±10 mmRisoluzione di 512Valore di posizione del bordo del nastro in uscitaI sensori di bordo a infrarossi Erhardt+Leimer FR5001 / FR5021 funzionano secondo il principio della barriera fotosensibile e utilizzano un LED a infrarossi come sorgente luminosa. Questo LED a infrarossi proietta la luce sul riflettore a microprismi situato dietro il nastro tramite uno specchio. Il riflettore riflette la luce secondo un principio di retroriflessione, a seconda di quanto il nastro copra il campo di misura. La luce riflessa viene riflessa sul gruppo CCD tramite l\'unità ottica telecentrica. Gli elementi CCD possono gestire un livello di segnale più elevato quando sono illuminati in questo modo. Il segnale viene convertito nel microprocessore in un valore di uscita proporzionale alla posizione del bordo del nastro e trasmesso al bus CAN. Questo valore di uscita può essere utilizzato, ad esempio, per attivare un controller digitale del nastro. Allo stesso tempo, la posizione attuale del nastro nel campo di misura viene indicata sul display a LED.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|