Medical OxygenRegulator – Emergency kit/Continuous Mixer Supply Reg
WARNING: messing with high pressure oxygen ANDATTEMPTING CONTINUOUS MIXING can result in injury, death and/or generally vastamounts of damage to property and people.You need to be prepared toaccept the risk, design and use your system properly andbe aware of theconsequences of failure. The \"OxygenHacker\'s Companion\" (see separate listing) is anexcellentresource to helpavoidblowing yourself up.
If you\'re setting up a continuous mixing system, why not get in touch.As well as the reg (most expensive bit), we have a bunch of otheruseful things - like modular mixing chambers/sensor holders/hose fittings, quick \'n\' dirty sensor reader/analysers and more. Not all of it is listed yet, but afull \"budget continuous mixing kit\" is not far away.
Continuous Mixer Supply Reg: If you’re making a continuous nitrox mixing system, one of the mostcritical bits is the pure oxygen system.This kit is everything you need to safely get oxygen out of a rentaltank or deco bottle, drop the pressure, and (manually) control how much oxygengets injected into your mixing chamber.A quality chromed brass medical oxygen regulator (with contents gaugeand inbuilt relief valve), flow meter and control, with quick connects to allowyou to use whatever supply tank is at hand.Don’t lie awake at night wondering if your hand-me-down dirty argon reghas an oxygen compatible diaphragm!
The contents gauge is in PSI as that’s how itcomes at present, but can be optionally upgraded to a dual kPa (bar x 100)/PSI ifneeded. The flowmeter reads (more or less)correctly atan outlet pressure of 50PSI (factory set), and reads up to 15LPM, but will controloxygen flows up to 100LPM. This means ifyou’re mixing nitrox 32% (adding 11% oxygen to air) 15LPM corresponds to a 3.9cfmcompressor, and 30LPM to 7.8cfm. Even77LPM for a 20cfm dive shop compressor, so there is plenty of capacity.
The reg will also work for helium if you’redoing continuous trimix. It will easily put out400-500LPM of helium (I tested it!), which is plenty for most applications, even with bigcompressors.
Emergency Oxygen Kit: Also included is a mask with non-rebreather bag (rated for single use only) and hose, which allows you to use the kit as an emergency oxygen kit – that’s what the reg was designed for after all!
Part #
Description
11-001
Medical oxygen regulator with HP QC fitting, DIN & pin index QC adaptors (as shown)
11-001-1
As above, but DIN only (still with QC connector for future expansion)
11-001-2
As above, but pin index only (still with QC connector for future expansion)
11-001-3
As above, with female QC only (no tank adaptors)
-
Upgrade contents gauge to dual kPa (bar x 100)/PSI
Bullnose adaptors are available separately,see earlier on in the catalogue. CHEAPER:if you really don’t want the quick connect, feel free get in touch for a cheaperprice.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.