Ejection Ramp and Case Slider Kit fits Lee Pro 1000 Progressive Reloading Press
$32.99

Ejection Ramp and Case Slider Kit fits Lee Pro 1000 Progressive Reloading Press
An upgrade and repair kit for the Lee Pro 1000 progressive reloading press: an improved ejection ramp plus a replacement case slider (left and right halves).
The ramp fills in the deep, sharp angle of the stock ramp so finished rounds slide off into your bin instead of piling up. The case slider is modeled to the same dimensions and hole locations as the original and reuses the original slider screw.
Fitment: Lee Pro 1000 progressive press. The designer tested the ramp with 9mm; other calibers may vary. Not claimed for other Lee presses.
Ramp about 165 x 50 x 29 mm. Package contains 1 ramp and 1 two-piece case slider. Printed in black PETG to order (slider printed solid). Press not included.
The first photo is the designer\'s own photo of a printed part (the color shown may differ; we print in black). The other photos are digital renders made from the actual design file, not photographs of our finished print; they will be replaced with photos of our own finished part once printed. Minor layer lines are normal for a 3D-printed part. Equipment shown or referenced is not included. This is an independent aftermarket part. Not made, sold, or endorsed by the original equipment maker. No OEM affiliation is claimed.
Ejection ramp and case slider designs by Jahn Roux, licensed CC BY-SA.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.