ESP32-C3F WiFi&BT Module with 4MB + ESP8266 Burning Fixture Development Board

Description:
Micro USB interface, onboard CP2102 Chip, you need to install the driver before use. Then put the wifi module into the flash burner, fill in and choose the corresponding parameters, the firmware will be automatically downloaded from your computer to the wifi moule. Very easy to program the chip module.
All I/O ports have been drawn out, it supports one-click firmware download function, and add burning, it is plug and play, very easy to program the chip module.
Onboard 2 LED indicators, blue LED is for Mode indicator, while green led is for serial communication indicator.
Onboard 2 micro Tactile push button switch, one is Reset, the other is download/flash.Application: ESP-01, ESP-01S, ESP-12F, ESP-F, ESP-S, ESP-12S,ESP-12E, ESP-C3F, ESP-WROOM-01C,ESP-WROOM-04C. Kindly note that it only works with SMD chips/chip module, can not work with implementing whole module like NodeMCUs or other development board.

WiFi Features:
A complete Wi-Fi subsystem that complies with IEEE 802.11b/g/n protocol and supports Station mode, SoftAP mode, SoftAP + Station mode, and promiscuous mode
Supports 20 MHz, 40 MHz bandwidth in 2.4 GHz band
1T1R mode with data rate up to 150 Mbps
TX/RX A-MPDU, TX/RX A-MSDU
Immediate Block ACK
Fragmentation and defragmentation
Automatic Beacon monitoring (hardware TSF)
4 X virtual Wi-Fi interfaces
Simultaneous support for Infrastructure BSS in Station mode, SoftAP mode, Station + SoftAP mode, and promiscuous modeBlue-tooth Features:
A Blue-tooth LE subsystem that supports features of Blue-tooth 5 and Blue-tooth mesh
Speed: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
Advertising extensions
Multiple advertisement sets
Channel selection algorithm #2Peripheral Interfaces:
GPIO * 15, 2xUART, I2C, I2S, SPI, PWM, ADC, USBWorking temperature: -40℃-85℃
Working temperature: -40℃-105℃ (optional)
Module Size:16mm*24mm*3mm

Please take picture of the programmer with ESP-01S wifi module for reference.

How to program?

Here take the programing the chip module with espressif flash download tool to flash the file in bin format for example.

1, Download the flash tool from espressif and also install CP2102 driver if you don\'t install it yet.
2, Open the flash download tool, and choose ESP8266. Fill in the bin file address in SPIdownload.
3, If the programmer you have in hand is the newest version, the Flash config is filled automatically, no need to choose. If you need choose it manually, you need set the flash config fistly.
4, Choose the COM port, baud rate is default.
5, Click \'\'Start\'\', and it starts to flash. If you failed to flash it, pls click \'\'Stop\'\' firstly, and then re-click \'\'Start\'\'
If you use the newest board, no need to press the Flash button. If yours is old version, you may need press Flash firstly.

Package Includes:
1 PCS ESP8266 Development Board + 5 PCS ESP32-C3F WiFi&BT Module

See more in the timeReturn PolicyContact usPaymentPlease kindly make payment asap, so that we can arrange your order promtly.If you have any problem with payment, please feel free to contact us.ShippingWe provide tracking number for ALL orders. You can track your parcels.Delivery timeNormally it arrives in 10-15 business days to US and European countries.DHL /Fedex/UPS arrives in 7-8 business days.Return Policy1.All products are eligible for 30-days money back guarantee.2.All returns should be guided by us. Please contact us for details before you return anything.
Contact us

1. Please don\'t hasitate to contact us BEFORE you give us neutral or negative response, so that we can satisfactorily address your concerns.
2. We accept dropshipping, bulk orders and customized products.
3. We are selling forArduino module, sensors, Nextion display and other oled or lcd screens. lidar range finder sensors, servo motors, various electronic components and for legoled, ect.