Doug Fleenor Design PRE10-A 10-Button Wall Mounted DMX Controller
$300.00

Doug Fleenor Design PRE10-A 10-Button Wall Mounted DMX Controller w/ transformer
Features Records up to 10 Presets Assign crossfade time from 0 - 999 seconds in length Solid aluminum, one-gang faceplate Works in conjunction with lighting console Connect via power (2 wires) and DMX 512 (3 wires)
Specifications Connector: Phoenix Contact MSTB series 5 position two part terminal block Model: MSTB 2,5/5-ST-5,08 Order Number: 17 57 04 8 Connector pin out: 1: DMX512 common 2: DMX512 data - 3: DMX512 data + 4: Supply common (tied to pin1) 5: Supply “hot” Input/Output circuit: ESD protected EIA-485 transceiver (LT1785) Indicators: Ten green preset indicator LEDs One red Lockout / Record LED User controls: Ten preset push buttons One recessed record push button One recessed fade time push button Option jumpers: Primary/Secondary mode selection Previous preset / Hold last look mode selection Power input: 9 to 15 volts AC or DC / 200mA per station (A 10 volt class 2 “doorbell” transformer is recommended for fixed installations) Color: Black anodized with silver engraved nomenclature Size: Faceplate: 4.5\"h X 2.75\"w X 0.2\"d Faceplate: rear inset: 4.05\"h X 2.4\"w X 0.1\"d Electrical box minimum inside dimensions: 3.5\"h X 2.1\"w X 1.25\"d

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.