Dive Rite - FT1/XT2 with 28" Hose for Scuba Diving
$575.00

All of the performance and reliability of the Dive Rite XT1 first stage regulators is also available in a fixed position port design.Flat LP and HP ports allow hoses to run straight out from the side of the regulator for more streamlined hose routing.Simple and compact, the FT1 has work of breathing performance on par with the premier regulators on the market.Rugged construction and a wear resistant Sn-Ni plating mean this regulator will continue to look as good as it performs.Balanced diaphragm first stage design maintains consistent IP and gas delivery regardless of depth or tank pressure.4 low pressure ports and 2 high pressure ports.All ports are angled 90 degrees from the Yoke fitting for ideal hose routing.
Environmentally sealed to protect against internal corrosion, contaminants, and freezing.
Nitrox Ready.The body of the FT1 first stage regulator has hose ports oriented such there is not room to accept a wireless tank pressure transmitter without interfering with hose routing. The solution is to use a standoff adapter, or some divers prefer to use a short HP hose pigtail
*The XT2Second stage regulator is suitable for oxygen use only if precautions are taken. Diver must use oxygen compatible materials, keep the regulator clean from contaminants during assembly and use and open the tank valve slowly.
Priced at $459.00

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.