Dinosaur ElectronicsIgnition Control Circuit Board, UIB 64We sell only Original, Made in the USA Dinosaur Electronics Circuit BoardsUniversal ignitor board specialized to work in Atwood’s® AC/Gas water heaters with 4 + 6 header pin or edge style connectors, or with the single 10 pin connector used in Atwood\'s® latest models. By resetting the jumpers it can function like a UIB S ignitor board so it can be configured to replace standard DSI ignitor boards that use a single 6 position connector found in older water heaters, refrigerators and furnaces.Compatibility:Atwood ® AC/Gas Water Heaters That Have Both 4 And 6 Position Edge Style/ 10 Pin Style ConnectorVoltage:12 VoltLength (IN):4-1/4 InchWidth (IN):3-1/4 Inch
- TEI Certified
- 12 Volt DC Operation
- Jumper Configurable For Universal Applications
- Fuse And Surge Protected
- 3 Diagnostic LEDs
- By Resetting The Jumpers It Can Function Like A UIB S Ignitor Board So It Can Be Configured To Replace Standard DSI Ignitor Boards That Use A Single 6 Position Connector
Propane is an explosive gas!
Ignitor boards should be installed by trained service technicians. This UIB 64 requires proper configurationto prevent undesirable behaviour.You must read the instructions to configure the board proplery for your application.
WARNING: This product can expose you to chemicals including Lead and lead compounds, which is (are) known to the State of California to cause cancer or birth defects or reproductive harm. For more information, visit www.P65Warnings.ca.gov
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.