Denali Electronics Black Rear Visibility Bundle
- Part #: DS21Z12661Z1
- Manufacturer Part #: DNL.07.KIT.010
Overview of Denali Electronics Black Rear Visibility Bundle The T3 is a unique and innovative approach to the common turn signal blending, red brake lighting, and amber turn signal lighting into one modular system. The rear T3 signal pods feature super bright red LEDs for run and brake functionality that also switch to amber when your turn signal is activated. Unlike other switchback turn signals, the T3s feature two separate rows of high-power single-color LEDs as opposed to weaker bi-color LEDs. The result is a shockingly bright light pod that rivals the intensity of auxiliary driving lights. While the T3s are available in a traditional turn signal housing, this low-profile modular signal pod is designed to be mounted to a variety of other locations on rear of your vehicle. Rear mounting kits allow them to be mounted to cases, license plates, and rear fenders. This kit includes 4 self-tapping screws, so no additional mounting kit is necessary for flush-mounting applications!The modular low-profile housing coupled with high power LEDs make the T3 the brightest and most versatile switchback turn signal on the market. Switchback Functionality: Red Run/Brake & Amber Turn Signal Run/Brake Circuit: 50% Run, 100% Brake 180-degree viewing angle Six high power LEDs (per pod) Low-profile design Easy connection to vehicle brake and turn circuit E-Mark approved run, brake and turn signal Total Power Draw: 0.25A Brake, 0.25A Turn Signal Input Voltage: 12V DC Size: 2.9\" x 1.13\" x 0.5\" Weight: 0.08 lbs Raw Lumens: 870 Waterproof: IP67 Cansmart Controller Gen II: Harness the flexibility and intelligence of your BMW motorcycle\'s CAN bus electrical system to make installation of accessories drastically easier with the new and improved DENALI CANsmart™ Controller GEN II. The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW \"WonderWheel\" or the CANsmart™ Accessory Manager Software. The CANsmart\'s four circuits are preprogrammed to connect and independently control two sets of DENALI 2.0 lights, a SoundBomb horn, and our B6 auxiliary brake light. Gen II - More Features, More Power, More Versatile Unlike the Gen I CANsmart, all four circuits of the Gen II can provide a full 10 amps of continuous power and each circuit can be configured to run any accessory type. The maximum power draw for the whole unit remains at 30 amps continuous. The Gen II also features two new auxiliary light settings. You can now modulate your auxiliary lights for added conspicuity, and set your left and right side lights to independently cancel when you activate your corresponding turn signal. Features: High/Low Sync - Set auxiliary lights to switch between a programmable high/low setting with the factory high beam switch. ON/OFF and Dim - Independently control two sets of lights ON/OFF and change intensity level (for both day and night) right from your original vehicle switches. Modulate Lights - Set auxiliary lights to modulate to increase your visibility to other motorists. Flash to Pass - Need to get someone\'s attention? Pulse your high beam switch three times and your auxiliary lights will strobe three times fast. Cancel With Turn Signal - This feature cancels the corresponding auxiliary light when you turn your turn signal on preventing powerful auxiliary lights from overpowering your signal. Inverse Flashing With Hazards - This features flashes your auxiliary lights inversely to your hazard lights, increasing visibility during road side emergency\'s. Plug & Play Horn Installation - Quickly and easily connect high power aftermarket horns like our SoundBomb™ without having to add an additional harness or relay. Strobe with Horn - With this feature selected the CANsmart™ software will automatically strobe your auxiliary lights when you sound your horn. This feature works whether you have the factory horn or SoundBomb™ horn installed. Deceleration Activated \"Smart Brake\" Technology - The CANsmart™ reads vehicle speed in real time to activate your auxiliary brake light during deceleration before you even touch the brake. You can adjust the sensitivity and minimum speed at which the Smart Brake Feature will activate. Flash Pattern Braking - The CANsmart™ provides four different flash patterns that make our super bright auxiliary brake lights even noticeable to motorists behind you. You can set auxiliary brake lights to only flash under hard braking, flash continuously as your brake is applied or flash four times rapidly then hold steady (California legal flash rate). Circuit Function Selector - The Circuit Function Selector in the CANsmart software will let you run any accessory of your choice on any of the four circuits. Click on a circuit icon to open the drop down menu and make your selection from the list of available circuit functions. Switched Power Source - The CANsmart™ provides a universal \"accessory\" option which simply gives you clean switched 12V power. That means whatever accessory you connect to this circuit will turn on and off with your ignition. Delay Time Out - You can also set the accessories on this circuit to have a delayed time out. This will keep them powered for up to 30 seconds after your turn off your bike. On Board Power - The \"accessory\" circuit option is ideal for powering your GPS, phone, heated gear or any other electronic device. License Plate Mount - For T3 Signal Pods: These low-profile steel mounting brackets allow you to mount rear T3 Signal Pods to the side of your license plate. Adding additional brake and turn lighting to the sides of your plate expands your lighting footprint giving you significantly more visibility over traditional single-piece light bars that mount below your plate. Cansmart Wiring Harness for T3 Switchback Signals: Use the DENALI wiring adapter for connecting T3s to the GEN II CANsmart Controller for a true plug & play connection. Compatible with all GEN II DENALI CANsmart Controllers, no wire tapping or other modifications are necessary, just plug directly into the circuits of the CANsmart to send the signals from your controller to the T3 Lights. This harness is designed to power a set of four T3 lights; two rear T3s & two front T3s, but can also be configured for an installation of just front or rear T3s as well.
Specs Color - Light Output Amber Color - Light Output Red Color - Lighting Lens Clear Units Each Weight 3.5 lbs This item fits the following machines:   BMW 2019, 2021-2023 R1250GS 2019-2024 R1250GS Adventure 2021 R1250GS Adventure \"40 Years GS\"
Purchase with confidence:
You may return any unused and unaltered item(s)
within 90 days for an exchange or a refund.
orders placed by 3pm (central) M-F are shipped the same day!
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.