DIY Development Board Protective Case and Stand Builder Kit for ESP32-2432S028
- KIT – PLASTIC PARTS ONLY — Build a home for your development board with the plastic case-and-stand parts for the 2.8-inch model, rather than a complete working electronics unit. This builder kit is not an assembled product, and electronics and hardware are not included; you finish the project yourself, turning a bare board into an enclosed desktop build with support built into the case.
- YOU WILL ALSO NEED — Complete your build with your development board, four M2x8 bolt-and-nut sets, and your own assembly tools; electronics, hardware, and tools are not included. Gather these before you start, then fit your board into the enclosure and finish the assembly, taking your project from separate components to a case-and-stand build ready to support your work at your desk.
- ONE DESK BUILD — Keep your development board enclosed and supported on your desk instead of leaving the bare board exposed beside your computer. The case shields it from incidental contact, while the integrated desktop stand supports the enclosed board on your work surface, bringing enclosure and support together when you sit down to write code or check how your latest project runs.
- VENTS WHERE NEEDED — Give heat a path out of the enclosure while your project runs on your desk. Built-in air vents sit over your development board\'s processor chip and microSD card slot, letting heat dissipate at those locations rather than closing them behind a solid case wall as you check a code change or keep your project running while you work at your computer.
- CONTROLS STAY ACCESSIBLE — Reset your development board or use its rear Boot button during programming without taking the case apart. Access to both rear buttons keeps those steps part of your desk work, and the accessible microSD card slot lets you change cards when your project calls for different stored files, so you move between button presses and card changes with your board still enclosed. WHAT\'S IN THE BOX: only the item named in the title. No hardware is included (see the description).
A bare development board leaves your desk project exposed to passing hands and gives it no enclosure of its own. Taking a case apart every time you need a button or a card change interrupts the work you sat down to do.
This DIY builder kit turns your development board into an enclosed desktop project with an integrated stand. The 2.8-inch case shields your board from incidental contact, while the stand supports the enclosed board on your desk or workbench. You build the enclosure around your board rather than buying a complete working electronic unit.
Air vents sit over the processor chip and microSD card slot, letting heat dissipate through the enclosure at those locations. The rear Reset and Boot buttons stay accessible for programming and resetting without disassembly. You also get access to the microSD card slot, so changing cards stays a straightforward part of working on your project.
For electronics hobbyists, makers, and developers, this is a build for the desk where you write code, test ideas, and run your projects. Put the case and stand to work beside your computer or on your workbench, keeping your board enclosed and supported while you work through the next change. The controls you use during development remain available after the enclosure is assembled.
IN THE BOX: Plastic parts for the development board case and integrated desktop stand. This is an unassembled builder kit, not a working electronic unit.
Gather your development board, four M2x8 bolt-and-nut sets, and your own assembly tools before you start. You supply the electronics, fasteners, and tools and complete the assembly yourself.
This is a builder kit: only the plastic parts are in the box. It
Hardware: Only the item named in the title is in the box. Depending on your setup, mounting it or attaching it to an existing part may call for hardware you already have, such as the original screws, or new screws, bolts, tape or adhesive. No hardware of any kind is included with this listing.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.