Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

DIY Dallas RTC Real Time Clock Project Kit DS1287 DS12887 DS12B887 BQ3287 OEC12C

DIY Dallas RTC Real Time Clock Project Kit DS1287 DS12887 DS12B887 BQ3287 OEC12C
$16.95

Buy Now

This is a kit to build your own drop-in replacement for RTC modules with solid body.
The kit includes the following items:1 - NW12887 PCB3 - 1x12 Machined Pin Header (1 excess header in case one is damaged during assembly)1 - CR1220 SMD Battery Holder1 - 32.768 MHz crystal1 - BQ3285LF RTC IC SSOP24
Important Notes:
  • This doesNOTinclude the battery, or a socket (recommended).
  • This is NOTa beginner project, and requires soldering a few small SMD components. The RTC IC may give you trouble. A generous amount of quality flux and patience is recommended.
  • The pin headers are fragile. If you bend a pin, you might as well scrap it. The pins will easily break off if bent. We have included an extra header just in case. If you are soldering this directly to the board, you may opt to use square pin header instead of the included machined.
  • The legs on the crystal need to be bent and cut to length before soldering.
  • I solder the components in this order: RTC IC, Crystal, [Clean Flux], Pin headers (where they wont obstruct battery holder), [Clean Flux], battery holder, then the last few header pins next to the battery holder.
We sell assembled units modules were widely used on 486 and Pentium mainboards. After years, the battery inside of such modules dies and there is no way to exchange it. With a dead battery, BIOS settings can not be saved and many mainboards will not boot properly. This alternative solution has a socket for CR1220, and the battery can be easily replaced again.
This part should be compatible with following RTC modules:
Dallas DS1287 / DS12887 / DS12B887Benchmarq BQ3287ODIN OEC12C887
Customers have reported that this module is a compatible replacement for these modules, although I have not tested myself:Twinhead TH1287Thanks to Necroware for this project. You can view the project details on his GitHub page.
Will carefully package for safe shipment.

Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Related Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design