|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
DHT22 / AM2302 Digital Temperature and Humidity Sensor Module with Cable -40~80℃
$9.13

The AM2302 Humidity Sensitive Capacitive Digital Temperature and Humidity Sensor is a temperature and humidity composite sensor containing a calibrated digital signal output. It applies special digital module acquisition technology and temperature and humidity sensing technology to ensure high reliability and excellent long-term stability. Therefore, the product has the advantages of excellent quality, fast response, strong anti-interference ability, cost-effective and so on. Each sensor is calibrated in a precise humidity calibration chamber. The calibration coefficients are programmed into the OTP memory and are called up internally by the sensor during the processing of the detected signal. The sensor consists of a capacitive moisture sensing element and an NTC temperature measuring element and is connected to a high performance 8-bit microcontroller. Communication with the microprocessor is via a single bus, requiring only one wire and transmitting 40 bits of data at a time, high bit first. Small size, low power consumption, long communication distance, can be used in harsh applications.Product measurement range: 0% to 99.9% (0℃-50℃ range) Humidity measurement error: ±2% Temperature Measurement Range: -40℃~80 Temperature measurement error: ±0.5℃ MAX±1℃ Resolution: 16 bits Sampling period:2s Working voltage:3V--5.5V With fixing screw holes for easy installation and fixing. Hole diameter 2.6mm, with matching Dupont cable length 20CM Instructions for use: \"+\": connected to the positive side of the power supply; \"-\": connected to the negative side of the power supply; \"out\": data bi-directional port of the sensor\'s internal SDA is used to read and write sensor data, connected to the microcontroller IO port, has been connected to the 5.1K pull-up resistor does not need to be connected to the external. Single bus communication special instructions: 1. Typical application circuits suggest that the length of the connection line is shorter than 30 metres with a 5.1K pull-up resistor, greater than 30 metres according to the actual situation to reduce the resistance value of the pull-up resistor. 2. 3.3V power supply when the length of the connecting line should not be greater than 100cm, otherwise the line voltage drop will lead to insufficient power supply to the sensor resulting in measurement deviation. 3. The minimum interval time for reading the sensor is 2s, reading interval time less than 2s may lead to inaccurate temperature and humidity or unsuccessful communication. 4. 4. The temperature and humidity value read out each time is the result of the last measurement, in order to obtain real-time data, it is necessary to read twice consecutively, it is recommended to read the sensor several times consecutively, and each time the interval between reading the sensor is greater than 2 seconds to obtain accurate data. Cautions: 1. 1. Exceeding the recommended operating range may result in a temporary drift signal of up to 3% RH. 2. Exposure to chemicals and diffusion of chemicals in the sensing layer may result in drifting of measurements and loss of sensitivity. and loss of sensitivity. 3. When measuring humidity, it should be ensured that the humidity sensor operates at the same temperature as far as possible. 4. The DHT11 should be installed as far away from the electronics as possible, under a heat source and with good ventilation of the housing. 5. Prolonged exposure to sunlight or strong UV radiation will degrade performance. 6. The quality of DATA signal cable will affect the communication distance and communication quality, it is recommended to use high quality shielded cable. Package include: According to your choice.Payment: PayPal, PayPal Credit, MasterCard, Apple Pay, Google Pay...are all supported. Shipping:Please make sure your address 100% right. Return Policy:If you are not satisfied with the item,any problem,please contact with us before you give a negative response,because it doesn\'t help you at all.we will try our best to help you solve the problems.response:Your satisfaction is very important for us.If you are satisfied with our item or service,please give us a positive response and 5-Star DSRs rating.Contact Us:We are very glad to help you,please feel free to contact us whatever any problems.Due to high volume of daily incoming emails and time zone difference,please allow 24 hours for us to reply.About Item: For the funcitonal products in our shop,we make sure that the functions are the same as description,but the actual color and shape may looks a little different from pictures because of the technical improvement and manufacturing variance.Please be advised before you offer.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|