DC 5V ESP8266 WIFI 1/2/4 Channels Relay Module ESP-12F Development Board
Single Channel:Reference description:
I. Overview
The ESP8266 single-channel relay development board is equipped with ESP-12F WiFi module, all I/O ports are led out, and it supports AC90-250V/DC7-12V/USB 5V and other power supply methods. Provide Arduino development environment reference code, suitable for ESP8266 secondary development learning, smart home wireless control and other occasions.
II. Features
1. On-board mature and stable ESP-12F WiFi module with large capacity 4M Byte Flash;
2. The I/O port of the WiFi module and the UART program download port are all led out to facilitate secondary development;
3. Onboard AC-DC switching power supply module, power supply mode supports AC90-250V/DC7-12V/USB5V;
4. The onboard WiFi module RST reset button;
5. ESP-12F supports development tools such as Eclipse/Arduino IDE, and provides reference programs under the Arduino development environment;
6. Onboard 1 5V relay, output switch signal, suitable for controlling loads with working voltage within AC 250V/DC30V;
7. On-board power indicator, 1 programmable LED and relay indicator.III. hardware introduction and description
1. Board size: 80*50mmWeight: 36g2. Interface introduction1. L, N: AC90-250V power supply;
2. AC90-250V to DC5V switching power supply (do not touch it directly with your hands when using AC power supply!!!);
3. VCC, GND: DC7-12V power supply;
4. Micro USB: DC5V USB power supply;
Note: AC90-250V, DC7-12V, DC5V USB can choose one of three power supply modes.
5. 6X6mm button: ESP8266 reset button;
6. UART program download port: ESP8266\'s GND, RX, TX, 5V are respectively connected to the GND, TX, RX, 5V of the external TTL serial port module. IO0 must be connected to GND when downloading, and then disconnect the IO0 and GND after download connection;
7. GPIO pin header leads to the port;
8. Relay output terminal:
NC: Normally closed, the relay is short-connected with COM before it is closed, and it is suspended after being closed;
COM: public end;
NO: Normally open end, the relay is suspended before being closed, and shorted to COM after being closed.
9. Power indicator LED;
10. Programmable LED;
11. Relay indicator LED: lights up when it is closed.3. Introduction to GPIO port
Number
Name
Function Description
Number
Name
Function Description
1
GND
Power ground
13
IO10
GPIO10
2
Relay
The relay drive port is driven by IO5 by default. If you want to use other I/O to drive the relay, you can remove R14, and then connect the I/O of the drive relay to this Relay pin
14
MISO
Slave output host input
3
IO2
GPIO2; UART1_TXD
15
IO13
GPIO13; HSPI_MOSI; UART0_CTS
4
IO4
GPIO4
16
IO14
GPIO14; HSPI_CLK
5
RX
UART0_RXD; GPIO3
17
ADC
A/D conversion result. Input voltage range: 0~1V, value range: 0~1024
6
3V3
3.3V power supply
18
3V3
3.3V power supply
7
SCLK
Clock
19
MOSI
Host output and slave input
8
IO15
GPIO15; MTDO; HSPICS; UART0_RTS
20
IO9
GPIO9
9
IO0
GPIO0
21
CS0
Chip Select
10
IO5
GPIO5
22
IO12
GPIO12; HSPI_MISO
11
TX
UART0_TXD; GPIO1
23
IO16
GPIO16
12
5V
5Vpower supply
24
GND
Power ground
IV. Package Include:
1 x AC/DC power ESP8266 WIFI single-channel relay module ESP-12F development board 2 ChannelFunction:
1. Onboard mature and stable ESP-12F WIFI module, large capacity 4M BYTE FLASH;
2. The I/O port of the WIFI module and the UART program download port are all led out to facilitate secondary development;
3. Onboard WIFI module RST reset button;
4. ESP-12F supports the use of development tools such as ECLIPSE/ARDUINO IDE, and provides ARDUINO
Reference program in the development environment;
5. Onboard 2 5V relays, output switch signal, suitable for controlling the working voltage of AC
Load within 250V/DC30V;
6. Onboard power indicator, 1 programmable LED and relay indicator.
Package:1x 5V Power Supply ESP8266 WIFI Dual Channel Relay Module ESP-12F Development Doard4 ChannelFunction pending:
1. Onboard mature and stable ESP-12F WIFI module, large capacity 4M BYTE FLASH;
2. The I/O port of the WIFI module and the UART program download port are all led out to facilitate secondary development;
3. Onboard AC-DC switching power supply module, power supply mode supports AC90-250V/DC7-30V/5v;
4. Onboard WIFI module RST reset button;
5. ESP-12F supports the use of development tools such as ECLIPSE/ARDUINO IDE, and provides ARDUINO
Reference program in the development environment;
6. Onboard 4 5V relays, output switch signal, suitable for controlling the working voltage of AC
Load within 250V/Dc30V;
7. On-board power indicator, 1 programmable LED and relay indicator.Package Include:1x AC/DC ESP8266 WIFI 4 Channels Relay Module ESP-12F Development Board
Shipping
Domestic
We believe you need to get your purchases as quick as possible. As a general rule your item will be shipped within 24 hours of you purchasing it. We pack and post from Tuesday to Sunday (Mondays we are closed) but definitely get all our mail off to the post office first thing Monday morning for you. Mail gets picked up at 12pm so chances are if you buy before lunchtime your item will leave the same day.
International
Same as above but understand that depending on what part of the world you are from it does take a little longer to send, delivery can be from 7-15 working days. Also other factors to take into consideration are quarantine and customs regulations in your country. It is also a consideration that customs duties and GST/VAT may be payable at the buyers expense.
Combined Postage (for items with shipping charges):
We are more than happy to combine postage, just use the Buy it Now function in (but DO NOT PAY after purchasing each item) to buy all the products you need, when you have finished request a combined invoice, we will base the shipping cost on the size, weight and your location.
response
* When you satisfied with our product and services please leave us positive response.
* If you have got the package, please confirm \"Delivery on time\" For us.
* If a problem occurs, contact us immediately with any email request.
* Just contact us using the \" Ask the seller a question\" link on .
Your Satisfaction is our Priority. Our goal is to make all our customers as happy as possible while shopping with us.
Contact us
For anything problem about product, price, shipping or order status, pleasecontact us via message.Just contact us using the \" Ask the seller a question\" link on .
We expect positive response and 5 scores DSR from you.
Return Policy
- We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
- If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
- Please include your ID and item number with any email requests.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.