|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Convert IDE Hard Drive to SCSI Interface–Hoei Precision iXT/SH 0505-iXSh Adapter
$17.99

Fancy Listing Template ✨Convert IDE Hard Drive to SCSI Interface – Hoei Precision iXT/SH 0505-iXSh Adapter ✨ 🔹 Product Highlights: -The Hoei Precision iXT/SH (also documented in legacy storage communities under the iXT/S family) is a discontinued, active protocol bridge adapter that allows a 40-pin IDE/ATAPI storage device (such as an IDE hard drive or optical drive) to operate on a 50-pin SCSI bus. Because SCSI and IDE use fundamentally incompatible electrical signaling and command protocols, passive pin-to-pin wiring adapters do not work. The Hoei Precision unit uses an onboard microcontroller to translate SCSI commands into IDE commands in real time. - Brand:Hoei Precision
- Manufacturer:
- Model:iXT/SH
- P/N:0505-iXSh
- Type:40-pin IDE/ATAPI to 50-pin SCSI Bus Adapter
- Signal Direction:The adapter is strictly one-way, connecting an IDE/PATA drive to a 50-pin SCSI host controller. It cannot connect a 50-pin SCSI drive to a 40-pin IDE motherboard port.
- Physical Connectors:One side features a 40-pin female IDC header that plugs directly onto the back of a standard 3.5-inch IDE drive, while the opposite side exposes a 50-pin male IDC SCSI connector and a 4-pin Molex power input.
- Common Applications:Hoei Precision manufactured duplication controllers and storage bridges widely used in vintage workstations (such as OpenVMS, classic Macintosh, and older samplers) as well as standalone Microboards disc duplicators.
- Configuration & Setup:
-IDE Drive Jumper. Set the attached 40-pin IDE hard drive or optical drive to Master (or Single Drive). Slave configurations are generally ignored by SCSI-to-IDE bridge controllers. - SCSI ID Selection. Use the binary jumper block on the adapter board to assign an unused SCSI ID (0–7) so it does not conflict with the host controller or other devices on the ribbon cable. - Bus Termination. If the adapter is placed at the physical end of the 50-pin SCSI ribbon cable, enable the onboard Terminator jumper. Disable it if the adapter sits in the middle of a daisy chain. - Dedicated Power. Connect a standard 4-pin Molex power plug directly to the bridge board in addition to powering the IDE drive. 📋 Specifications - New, JOS, Never used.
- No ESD, No Error, No dust, no dent, no bent, no damage. - Guaranteed no DOA.
- Original Part – not junk / burnt-out
- Refer to real pictures for details
- Package Includes: Hoei Precision SCSI Adapter Only
✅ Condition & Warranty - Condition:New
- Warranty: 30 days Limited Warranty
🚚 Shipping & Terms - sale winner must contact us within 2 business days and send payment within 3 days.
- Returns must be in same condition as shipped. No returns if misused, broken, or tampered.
- Up to 15% restocking fee applies (except DOA/defective/wrong item).
- Return postage not covered (except DOA/defective/wrong item).
- Ships via UPS Ground or USPS Mail (48 contiguous US states).
- Extra shipping may apply for Canada, Hawaii, Alaska, Costa Rica, Puerto Rico.
- Sorry, No COD Delivery
- Sales tax automatically added by

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|