- DEUTSCH - (Kurzfassung)CapSlinger Lens Snap für schnelleren und sichereren Objektivwechsel (5er-Pack)• Entwickelt für Fotografen, die unterwegs häufig Objektive wechseln
• Kein Objektiv-Jonglieren mehr• Nur 2 g pro Stück• Kompatibel mit den meisten Wechselobjektivsystemen mit Bajonettanschluss• Patentgeschützt
⚠ Wichtiger Hinweis:CapSlinger hält die hintere Objektivkappe,nicht das Objektiv.Lassen Sie ein Objektiv niemals los, während es mit dem CapSlinger verbunden ist.- ENGLISH -
CapSlinger for Safer & Faster Lens Change (5 pcs Pack)
Specifications
Dimensions
36 × 26 × 6 mm / piece
Weight
2 g / piece
(Two pieces are required for switching between two lenses)
Material
Soft TPU
Compatibility
Mirrorless Systems
- Sony E
- Canon RF
- Nikon Z
- Fujifilm X
- Micro Four Thirds
- L-Mount
DSLR Systems
- Canon EF
- Nikon F
- Pentax K
- Sony A
Compatible with all bayonet mounts.
May not be compatible with M42 screw-mount systems.
Package Contents
- 5 × CapSlinger
- Pre-installed adhesive tape
- Quick start guide
Installation
- Clean the outer surface of the rear lens cap.
- Remove the liner.
- Attach the CapSlinger to the rear lens cap.
- Ready to use.
Installation takes less than one minute.
Usage Tip
Don\'t forget to bring one extra rear lens cap with a CapSlinger attached.
You\'ll need a rear lens cap for the lens currently mounted on your camera.
Notes
- Lens caps are not included. Camera, lens and lens caps shown in product photos are for demonstration purposes only.
- Protected by granted patents.
- This is an early small-batch production run manufactured using 3D printing. Minor cosmetic variations may occur between production batches.
- Do not hang or carry lenses using the CapSlinger. Always support the lens by hand. The CapSlinger is designed to assist attachment and removal of the rear lens caps, not to support or carry the weight of a lens.
FAQ
Q: Won\'t it damage the hot shoe?
A: The CapSlinger is made of soft TPU and slips off under excessive force to protect the hot shoe.
Q: How much weight does it support?
A: About 50 g, roughly the weight of a rear cap. The CapSlinger holds only the cap, not the lens. The lens weight limit is whatever you can comfortably hold in one hand.
Q: If it fails, what happens?
A: The rear lens cap may fall. The camera and lens should remain safely in your hands. Pick up the cap, blow off the dust and keep shooting.
Q: Can I use it with my strap, quick-release system, L-plate or cage?
A: Of course! Whatever setup you use, the CapSlinger stays attached to the rear cap and waits in your pocket or bag until you need it. It does nothing to your camera or lens.
Q: My hot shoe is already occupied by a flash or microphone.
A: Use any cold shoe on your cage, L-plate, or rig. In fact, use of a cold shoe is even more recommended whenever available.
CapSlinger is not a lens carrying solution.
It is a lens swap solution.
Early Production Batch
While the CapSlinger Lens Snap is expected to be compatible with most interchangeable-lens camera systems, not every camera and lens system has been tested yet. If you discover a compatibility issue with your rear lens cap or hot/cold shoe interface, please send us a message with details about your camera and lens system. We will continue expanding our compatibility database, and incompatible purchases will be fully refunded.
!!! Always support the lens by the hand !!!
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.