|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
CIO-EXP16 Analog Multiplexer (Computer Boards, Measurement Computing, Digilent)
$25.00

Bought this for a project but never used it. It\'s very old but looks like it\'s never been used. The Digilent (aka Measurement Computing, aka Computer Boards) site has all the specs. There\'s no model name listed on it and dimensionally it\'s larger than the CIO-EXP16 but performs the same function of multiplexing the 16 analog inputs to a single ADC channel on your analog input DAQ card. So if you have a 8 channel A/D board, that gives you 128 inputs (16*8). A 16 channel A/D board will give you 256 inputs (16*16). Perfect for thermocouple or other slowly changing voltage inputs. NOTE: The board is populated with two chip carriers for each channel. Only the first 4 chans have chips in them. I\'m not sure why or if they are required. Here\'s the info on each chipset:* LF398-N Monolithic sample and hold circuit (10-µs acquisition, 7-mV offset)* INA110KP Fast-Settling FET-Input Very High Accuracy Instrumentation Amplifier Also, the board does not include any of the 6 standoffs. VENDOR DESCRIPTION:CIO-EXP16 features The CIO-EXP16 is a 16-channel signal conditioning accessory board supported under popular Microsoft® Windows® operating systems. The CIO-EXP16 is used to expand the number of analog inputs and the range of amplification of DAS08 and DAS16 series boards. Using multiple CIO-EXP16 boards, a 16 channel A/D board can be expanded to up to 256 inputs; an 8 channel A/D board can be expanded to up to 128 inputs. The CIO-EXP16 board has 16 differential inputs that are multiplexed into one single-ended output channel. Four digital inputs are controlled by the A/D board\'s digital outputs, and are used to select one of the multiplexed channels for output. An on-board semiconductor sensor provides a cold junction compensation (CJC) reference for thermocouple applications. You select one channel on the A/D board to send the multiplexed analog output to. In addition, you can output the CJC signal to a second A/D board channel. You can enable an input filter, ground reference, and open thermocouple detect options for each channel using on-board solder gap switches. You specify the gain of the multiplexer with an onboard gain switch.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|