|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Bolt-On Rear Disc Brake Kit 11" Rotor For Rear Disc Brake Kit w/ E-Brake Caliper
$350.09

Rear Disc Brake Conversion Kit with Parking Brake Calipers Direct Fit For Ford 9 Inch Big Bearing Rear AxleAbout the itemThis direct-fit rear disc brake conversion kit is designed for Ford 9 inch big bearing rear axle, perfectly upgrades outdated drum brake systems and solves weak braking, long stopping distance and unstable rear braking during daily driving and heavy load conditions. Equipped with premium metal rotors and parking brake calipers, this rear brake kit delivers consistent braking performance and long-term durability for classic Ford vehicle restoration and performance upgrade.Features - Drum to Disc Brake Upgrade: Replaces inferior Origin-al drum brakes with 11.25-inch vented disc brake structure, provides stronger and more linear stopping power, shortens braking distance and improves overall driving safety.
- Integrated Parking Brake Design: Comes with complete left and right parking brake calipers with brake pads, retains emergency braking function, meets daily road driving and vehicle inspection requirements without extra modification.
- Premium Metal Wear Resistance: Adopts high-strength cast iron rotors and solid metal accessories, high temperature resistant and fade-resistant, dissipates heat faster than drum brakes to ensure stable braking during frequent braking.
- Precise Axle Compatibility: Perfectly fits new & old style big bearing Ford 9-inch rear axle with 2-3/8” to 2-1/2” flange offset, supports direct installation without cutting or drilling.
- Dual Wheel Bolt Pattern: Features dual 5x4.5” and 5x4.75” bolt patterns, compatible with Ford, AMC, Chevy and GM wheel hubs, greatly improves vehicle modification compatibility.
- Complete Grade Hardware Kit: Matched with Grade 8 high-strength bolts, customized gaskets and U-shaped brackets, all mounting accessories are fully equipped to avoid matching trouble.
- Easy Bolt-On Installation: Standard reserved hole position and accurate size design realizes plug-and-play installation, suitable for DIY modification and professional repair shop SpecsApplicable AxleNew/Old Style Big Bearing Ford 9 Inch Rear Axle, 2-3/8”~2-1/2” Axle OffsetMain MaterialHigh-strength Cast Iron & Solid MetalProduct ColorSilver + Iron GrayBrake Rotor Size11.25 Inch Diameter; Center Hole 7.1cm; Dual Bolt Pattern 5x4.5”/5x4.75”Caliper SizeLength 17cm, Integrated with Brake Pads & Parking BrakeGasket Specs4.85*1.85cm Oval Gaskets, 3 Thickness 0.3/0.5/0.8cm (4pcs each)Minimum Wheel Size15 InchPackage Contents2*Brake Rotors, 2*Parking Brake Calipers, 6*U-Brackets, 12*Oval Gaskets, 8*Long Bolt & Nut, 8*Short Bolt & NutCore FunctionRear Drum Brake Conversion, Braking Performance Upgrade, Parking Brake RestorationApplication ScenariosIdeal for classic Ford 9-inch rear axle vehicle renovation, Origin-al drum brake system upgrade and daily performance modification. Perfect for solving insufficient rear braking power, brake heat fading and aging drum brake failure issues, suitable for street driving restoration and budget-friendly vehicle performance improvement.
Installation Tips For passenger car axles only, 15” and larger wheels only Fits 9 inch housing axle offsets of 2-3/8” to 2-1/2” (measured from outside of housing flange to outside of axle flange, not measured out to axle register but only surface where the rotor sits against). Requires “big bearing” housing ends (for a 3.150” O.D. bearing) with 3/8” bearing retainer bolt holes. Brake rotor has a 2.78” center hole and works with axle shaft flanges no larger than 6-1/4” diameter. If your axle shaft flange exceeds that diameter, you will need machine the flange to decrease the diameter. Brackets position the calipers in a rear-mid orientation (3 o’clock on the driver side rear wheel), making this ideal for pull-type emergency brake cable systems (most systems work in this way). The caliper piston pin needs to be aligned with the notch in the pad to avoid fitment issues. This kit is an aftermarket solution. Due to changes in production in certain years, your application may require modifications beyond these instructions for this kit to install properly. This kit will only fit 8\" for Ford housings with big for ford You Are Not Sure The Item 100% Fit For Your Vehicle Before Your Purchase. Please Allow 1-3CM Differs Due To Manual Measurement. Due To The Different Display And Different Light, The Picture May Not Reflect The Actual Color Of The Item. Thanks For Your Understanding.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|