Bluetooth Wireless Controller Internal Adapter For Sega Dreamcast DC Console

iBlueControlMod SEGA DC Bluetooth Wireless Controller Internal Adapter For SEGA Dreamcast Bluetooth Adapter For SEGA DC Console

Note1: This kit can only be used with our Applications(iBlueControlMod config).

Note2: this kit not \'BlueRetro mod\'. BlueRetro APP can\'t use on this kit.

Don\'t upgrade \'BlueRetro firmware\' to this kit! Otherwise, this kit will be damaged.

Important notice:

There may be several modes for SEGA Dreamcast consoles.

We have found two models \"two pins fan\" and \"three pins fan\" in the market.

Please open the SEGA Dreamcast to check the pins of the fan before purchasing this kit.

Compatible Controllers:

Description：

iBlueControlMod adapter is a high speed
Bluetooth controller interface that opens retro consoles up to the plethora of
modern controllers with latencies that even some wired adapters can\'t manage.
This new board allows for the use of up to 4 connected Bluetooth controllers,
and can be mixed and matched with wired controllers on any of the ports for
seamless operation.

Features:

lUp to 4 Bluetooth controllers can be paired at once.

lNo need welding, no need trimming, no outside extension wires.

lEasy installation, good choice for green hands, just open shell and
put the mod adapter inner machine to enable consoles connecting wireless
joypads.

lEasy firmware update tool that only requires a Bluetooth enabled
device like a computer (incompatible phone).

lConfigurable button mapping using a applications software on a
computer.

lDreamcast wired controllers are still available after updating this Bluetooth
mod.

lBuilt in LED indicator, make connecting more clear.

lReplaceable socket for CR1220.

lSimple installation.

Reset Button Usage:

The reset button on the console has been
converted to offer new functionality based on how long you hold the button
down. While it is being pressed the front ports will light up to show which
state you will be enabling.

1.Holding for 0-3 seconds will test whether all 4 ports are working properly.

In this state all four front port LEDs will be solid on.

2.Holding for 4-6 seconds will disconnect
all connected Bluetooth controllers

In this state all four front port LEDs will
be slowly blinking.

3.Holding for 7-9 seconds will enable
pairing mode

In this state all four front port LEDs will
be blinking faster

4.Holding for 10 seconds or more will
factory reset to the original firmware and remove any custom configs

In this state all four front port LEDs will
be blinking rapidly.

5. Hold reset button while powering on the iBlueControlMod
adapter will be in sleep mode and will not interfere with the console use this
in the event that a peripheral is not working nicely with iBlueControlMod.

NOTE: Please pairing the wireless controller first if the wireless controller never pairing with this iBlueControlMod before.

--- Power off the Dreamcast console and then power on it again, willenable the pairing mode. (Or, Holding the reset button for 7-9 seconds will also enable pairing mode.)

Include:

1x iBlueControlMod adapter for SEGA Dreamcast

1xSD Card (include iBlueControlMod Applications and manual.)