Bluetooth True RMS Clamp Multimeter 1000A AC DC Current Voltage Resistance NCV

🌟 570S‑APP True‑RMS Bluetooth Digital Clamp Multimeter

6000‑count auto‑range True‑RMS clamp multimeter with Intelligent‑Meter Bluetooth App. Measures AC/DC current up to 1000A, AC/DC voltage, resistance, capacitance, frequency, duty‑cycle and K‑type thermocouple temperature. Built‑in NCV non‑contact voltage detection, DATA‑HOLD, REL relative measurement, MAX/MIN capture, LCD backlight. Safety rated CAT II 1000V / CAT III 600V. Perfect for electricians, workshop maintenance, household circuit troubleshooting and field‑site electrical inspection.

This professional clamp meter adopts True‑RMS technology to deliver precise readings for distorted non‑sinusoidal waveforms. Connect wirelessly via Bluetooth (10‑15 m range) to the Intelligent‑Meter smartphone App (iOS 7.0+ / Android 4.3+). You can view real‑time readings remotely, record historical measurement data, check MAX / MIN / average values, export and share measurement files directly on your mobile phone. The large 45 mm jaw opening easily accommodates thick single‑core conductors for current‑clamp measurement.

✅ Key Features At A Glance

• ⚡ True‑RMS 6000‑Count Auto‑Range Measurement: Accurate readings for complex non‑sinusoidal electrical waveforms.
• 📶 Bluetooth Intelligent‑Meter App: Real‑time remote monitoring, data logging, MAX/MIN/average value display, data export & share, adjustable sampling rate.
• 📏 45 mm Large Jaw Opening: Supports single‑conductor AC/DC current measurement up to 1000A.
• 🧰 Complete measurement functions: AC / DC Voltage & Current, Resistance, Capacitance, Frequency, Duty‑Cycle, K‑Type thermocouple temperature (℃/℉ switchable), Diode test, audible continuity beep.
• 🚨 NCV Non‑Contact AC Voltage Detection: Audible alert for live AC wires (90‑1000V AC).
• 📌 Practical functions: DATA‑HOLD, REL relative zero‑measurement, MAX / MIN value capture.
• 💡 LCD backlight for dim‑light working environments.
• 🛡️ Safety compliance: IEC‑1010‑1, CAT II 1000V / CAT III 600V, Pollution Degree 2.
• 🔋 Powered by 1 × 9V battery; compact handheld design for outdoor field‑site work.

📋 Technical LCD display; sampling rate: 2‑3 times / secondJaw OpeningMax. 45 mmTrue‑RMSFor AC voltage & AC current measurementDC Voltage600 mV‑1000 VAC Voltage(True‑RMS)6 V‑750 V (40‑2 kHz)DC / AC Hz ~ 9.999 ~1000℃ (‑4℉~1832℉), ℃/℉ switchableNCV Detection90‑1000 V AC sound‑light warningBluetooth AppIntelligent‑Meter; iOS7.0+, Android4.3+; wireless range 10‑15 mSafety StandardIEC‑1010‑1, CAT II 1000V / CAT III 600V, Pollution Degree 2Power Supply1 × 9V 6F22 batteryDimensions225 ×77 ×45 mmNet WeightApprox. 330 g (with battery)📱 Intelligent‑Meter App Main Functions

✅ Real‑time remote measurement display ✅ Record MAX, MIN and average measured values with time stamps ✅ Start / stop data logging, browse complete historical records ✅ Download, export and share measurement‑data files ✅ Adjustable sampling rate, rename connected device, view firmware‑information

👷 Suitable Applications

• Professional electrician maintenance & electrical‑fault troubleshooting
• Household electrical‑circuit inspection
• Workshop & factory equipment repair
• HVAC‑system testing
• Automotive‑electrical system check
• Electrical‑teaching lab practice

⚠️ Important Safety Instructions

1. Remove test probes completely before performing current‑clamp measurement. Only clamp one single conductor inside jaw for valid current reading.
2. When measuring voltage above 60 V DC or 30 V AC, strictly observe electrical‑safety rules to prevent electric‑shock hazard.
3. Disconnect test probes from circuit before switching measurement‑function or range gear.
4. Never exceed the maximum input limit of each measurement‑range.
5. For in‑circuit resistance / capacitance testing: cut off circuit power and fully discharge all capacitors before taking measurements.
6. Remove battery for long‑term storage to avoid damage caused by battery‑leakage.
7. NCV function works only as auxiliary reference; do NOT rely solely on NCV to confirm zero‑voltage state.

📦 Package Contents

• 1 × 570S‑APP True‑RMS Bluetooth Clamp Multimeter
• 1 Pair of Multimeter Test Leads
• 1 × K‑Type Thermocouple Temperature Probe
• 1 × User Manual