-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
if you have any problem,pls contact with us.
Blue 128x64 OLED Display Module SSD1309 SPI/IIC Serial Port For Arduino 2.42\"
Features:
This is a 2.42 inch OLED display module of 128x64 resolution in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current.
Working without backlight, the OLED display module could give out light by itself.
In low ambient light conditions such as a dark room, an OLED screen can achieve a higher contrast ratio than an LCD.
OLED display module also has a much faster response time than an LCD.
The display with small dimension is suitable for MP3, function cellphone, smart health device, etc.
The seventh pin CS signal is leaded by default; If you do not need it, you can solder R18, then CS signal is directly grounded.SPI communication or I2C communication can be switched by configuring three resistors R3 R4 R5
For IIC communication, the resistor on R4 needs to be moved to R3, and the R5 is soldered with 0 ohm resistor.
Product Introduction:1.Size:2.42 inches2.Resolution:128*643.Color: Blue
SPI Interface Definition:1.GND:power ground2.VCC:power positive3.SCL:clock wire4.SDA:data wire5.RES:reset wire6.DC:data/command7.CS:chip selectionPackage Included:1 x 2.42\" SSD1309 128x64 Blue OLED Display Module SPI/IIC Serial Port For Arduino
Shipping1.We only ship to the confirmed address provided by . please make sure your address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can\'t take a refund.
response1.We greatly appreciate your POSITIVE response. Please do NOT leave negative response without asking for help.
2.Please DON\'T leave negative or neutral response if you haven\'t received item in 30 days, because we have mentioned the shipping time repeatedly.
Payment1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
Return policy1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your ID and item number with any email requests.
Contact us1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the \" Ask the seller a question\" link on .
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
Blue 128x64 OLED Display Module SSD1309 SPI/IIC Serial Port For Arduino 2.42\"Features:
This is a 2.42 inch OLED display module of 128x64 resolution in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current.
Working without backlight, the OLED display module could give out light by itself.
In low ambient light conditions such as a dark room, an OLED screen can achieve a higher contrast ratio than an LCD.
OLED display module also has a much faster response time than an LCD.
The display with small dimension is suitable for MP3, function cellphone, smart health device, etc.
The seventh pin CS signal is leaded by default; If you do not need it, you can solder R18, then CS signal is directly grounded.SPI communication or I2C communication can be switched by configuring three resistors R3 R4 R5
For IIC communication, the resistor on R4 needs to be moved to R3, and the R5 is soldered with 0 ohm resistor.
Product Introduction:1.Size:2.42 inches2.Resolution:128*643.Color: Blue
SPI Interface Definition:1.GND:power ground2.VCC:power positive3.SCL:clock wire4.SDA:data wire5.RES:reset wire6.DC:data/command7.CS:chip selectionPackage Included:1 x 2.42\" SSD1309 128x64 Blue OLED Display Module SPI/IIC Serial Port For Arduino
Shipping1.We only ship to the confirmed address provided by . please make sure your address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can\'t take a refund.
response1.We greatly appreciate your POSITIVE response. Please do NOT leave negative response without asking for help.
2.Please DON\'T leave negative or neutral response if you haven\'t received item in 30 days, because we have mentioned the shipping time repeatedly.
Payment1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
Return policy1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your ID and item number with any email requests.
Contact us1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the \" Ask the seller a question\" link on .
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
Am 13.01.2026 hat der Verkäufer die folgenden Angaben hinzugefügt:
Blue 128x64 OLED LCD Display Module SSD1309 4 Pin IIC I2C Arduino 2 PCS 2.4 In$34.74
5pcs 0.96" I2C IIC 128X64 LED OLED LCD Display Module Arduino Blue Color SSD1306$20.88
1.3" I2C IIC 128X64 OLED Display Module Arduino Blue Color SSD1106 US$6.48
2.4" 128x64 OLED LCD Display Module SSD1309 I2C Interface for Arduino - Blue$43.19
0.96" I2C IIC Serial 128X64 128*64 Blue OLED LCD LED Display Module for Arduino$2.40
0.96 Inch OLED Display Module SSD1306 I2C 128X64 LCD Screen Arduino Soldered$4.98
Yellow Blue 128x64 OLED Module 0.96 Inch - Ideal for Custom Electronics Displays$11.97
Computer display 128 X 64 OLED 2.42'', ver 4.1 SSD1309 (blue color).$10.95
www.userbars.org
