Arduino Uno Nano 4 Axis Stepper Control CNC3018 Mill G-Code A4988 Software CDROM

Arduino Uno Nano 4 Axis Stepper Control CNC Mill G-Code Translator including training and G-Code tutorial videos
Description

The \"Arduino Uno Nano 4 Axis Stepper Control CNC Mill G-Code Translator A4988 Compatible Easy to Use and Friendly Software\" or \"Pure Control\" CNC Controller Software is based on the advanced RoutBot industrial software. It is a high performance and low cost, PC based motion controller for CNC machine that can precisely control up to 4 linear or rotational axis. The Pure Control Software is professionally made, easy to use and versatile. The Pure Control Software can be used with almost any stepper motors. The Pure Control Software can be easily configured using a friendly user interface. The Pure Control Software is flexible and can be utilized with almost any motor driver box or with a break out board. \"Install Pure Control CNC on a WIN10, 8, 7, XP, or 2K PC\" Pure Control CNC is installed in Windows. The Windows self extract application is used to install the Pure Control CNC friendly graphical user interface on a Win10, 8, 7, XP, or 2K desktop or laptop computer. The computer that you install the graphical user interface on, can be a computer that you commonly used to perform other tasks. This is possible since Pure Control CNC graphical user interface requires very little CPU resources and do not slow down your computer. The application also has the firmware and firmware loader to program your Arduino Uno/Nano board. The Graphical User Interface Application computer and the Arduino Uno/Nano CNC Controller are connected via a USB cable.

Features

1. Runs on almost any PC which has : WIN 10, 8, 7, XP, Millenium, NT 2K, 98
2. Low PC CPU loading, that do not hang or overload your PC, so you can use your PC to perform other tasks.
3. Load your g-code and start machining. Easy straight forward operation.
4. Quick configuration for many cnc type. Simple configuration for custom cnc.
5. When powering down record position of cnc x,y,z,w; so it does not loose cnc machine position at start up.
6. Integrated firmware to easily program Arduino Nano/Uno
7. Hints to help and guide during operation plus tutorial videos all embedded in the software.
8. Up to 16 khz operation for precise stepper motor motion.
9. Jogging on all 4 axis x, y, z, w. 4th axis (w) can be geared to x or y (via g-code) to create surface of revolution.
10. Emergency shutdown for safe operation. Checksum for reliable serial communication.

How to use the RoutBot® 4 Axis CNC Stepper Control

Step 1 : \"Install in Windows\"Using the download link, installRoutBot® in Windows S. Pro., WIN 10, WIN 8.1, WIN 8, WIN 7, XP, NT, Millenium, WIN 2000. Then you active the software using the instructions provided.

Step 2 : \"Configure your CNC\"With RoutBot® it is easy to configure your cnc. Select a pre-defined cnc machine type or enter parameters for a custom cnc..

Step 3 : \"Load the g-code and start machining\"Once your cnc is configured, you load your g-code file and start machining.

Minimum System Requirements

Pentium 4 or higher, Windows S. Pro/WIN 10/WIN 8.1/WIN 8/WIN 7/XP/2000, 128 Mb of RAM or higher, 512 Mb of Hard Disk space or higher. Acrobat pdf Reader V5.0 or higher. Windows Media Player 8.0 or higher.

This listing is for a single license of the RoutBot® 4 Axis CNC Software to be used in one PC. What is included in this listing is the RoutBot® 4 Axis CNC CDROM which has RoutBot® 4 Axis CNC software (self extract) and the user information required to activate the software.

You can inquire about any RoutBot® products via electronic mail. To send us an electronic mail just contact us via this listing.