|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Arduino ESP32 Board RPI Rechargeable Battery Pack UPS 3.7V 10000mAh w/PH2.0 Plug
$39.99

3.7V 10000mAh LiPo Battery Rechargeable 1S 3C Lithium Polymer Battery with Protection Board Insulated Rubber Tape, PH2.0 Plug for Arduino ESP32 Board RPI Battery Pack UPS (1 Pack) - A-grade lithium cobalt oxide battery system, which, provides higher energy and higher density also complies with UN 38.3 standards certification, ensuring safety and reliability.
- During long-term storage, keep the battery charged between 40% and 60%. Recommend charging the battery once every 3 months after receiving it, maintaining a voltage of 3.7-4.0V. Store the battery in a cool, dry place.
- Over-Discharge Protection: When the battery is about to deplete, and the voltage drops to 3.0V, the protection circuit will shut down, preventing further discharge and providing over-discharge protection.
- Over-Charge Protection: During battery charging, when the voltage reaches the maximum battery voltage (4.2V), the protection circuit will automatically cut off power, indicating that the battery is fully charged and providing over-charge protection.
- Short Circuit Protection: In the event of a short circuit, the protection circuit will automatically shut down within milliseconds and will not power on again. Note that if the battery is short-circuited (bypassing the protection circuit), the protection circuit may also fail due to prolonged high current or component overheating.
SHIP TO CONTINENTAL USA ONLY

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|