Contouring Permanent-Self-Adhesive Waterproof
Vinyl Keypad Image Decal Overlay
Clarification Notice: This is an aftermarket watch accessory. This is not manufactured by Casio, nor are any Casio trademarks used on this productnor are any other Casio materials used to make it. This decal does NOT use the same fonts or colors as Casio.It is a Decal Accessory only to be placed onyour real Casio Watch thatyou own,in which said watch owned by you is covered by Casio Trademarks. Any reference to Casio here is referring to your own Casio watch and model so that you know which model this will work for.Casio does not make any watchKeypad Decals for these antiques in which no parts are available for them today, nor did Casio ever sell this item as a separate part to purchase. Instead you had to buy a Casio Watch new case to get a new keypad. These Decal Accessories only stick over the original Casio Keypads. They do not replace any Casio Keypads because no electric switches are contained in these decals.
Please do NOT buy until you view all the photos and read the Instructions below that point out that you trim these to fit yourself. Someone purchased without viewing all the photos and reading the instructions, then complained after they installed them on their watch. Be informed, and know what you are getting before buying this item. Thank You.
Also keep in mind the photo on the right watch above was pasted over that watch image to give you an idea of what that decal would look like and not an actual photo of the decal, however that scanned image was before the clear lamination was applied to slow down ink wearing off and make decal last longer. That lamination does slightly darken the overall appearance, but only slightly. So your decal may not be quite as bright as the above image. See added image after lamination added before alleging decal looks milky because you failed to read the text above! The above image is a scan and under poor lighting others may see reflection of light making it appear milky in bad light.
If your old Casio DBC Databank watch keypad membrane is cracked, missing, or unreadable, then this newlyremanufactured keypaddecal may bring new life to your old Casio DBC Watch.
Lets face it, if you can\'t read the keypad on one of these watches, you have lost about 90% of its functionality, or less depending on what is left to actuallysee. You have to be able to read the keypad in order to program this watch!
You cannot find replacement keypad membranes for purchase for these vintage watches, since these watchesand theirparts are no longer being produced and no longer available for sale. These are fresh reprints of the keypad image (consisting of lettering, symbols and numbers).
This decal is a fresh 600 dpi resolutionaccessory imageto place over youoriginal keypad image, and isprinted on a Permanent-Self-Adhesive Waterproof Vinyl, and covered with a clear laminate over theinkto prevent the lettering and numbers from wearing off asquickly as the original did, because the originals had no clear laminate to protect the printing like these do.
No watch disassembly required, only a good cleaning and application of replacement keypad image decal over the old keypad.
Photos in this listing include:
- One Before and Afterphoto of same watch with Replacing Keypad Decal
- A sample of the source image used to create these new decals
- A Camera Photo of the actual printed decal (what you actually receive)
- Twophotos from watches that have completely lost the keypad image
- Photoof watch keypad image that is cracked and numbers worn off
Those later aforementionedphotos illustrate the need for one of these New Vinyl Keypad Image Decal Overlays to restore the visual functionality of your watch with previously unreadable key you need to properly clean your old keypad preferably with something that will not leave a residue like Alcohol, and allowed to dry completely before applying the new decal. Surface must be very clean and completely dry! Not slippery or slimy after cleaning!
If you have a keypad membrane that is only cracked but still mostly intact, you should be able to apply this decal directly over the old decal.
If your old decal is missing, just make sure the old rubber membrane under it is clean and completely dry so that the new decal is able to stick to it.
About photos of this decal on .The images show an external dark border around the white line border. The dark is what gets trimmed off so that only the white line border should be left. Think of it as a cutting line to trim to fit.
Before placing decal in position, a dry fit may be necessary to make any minor trimming to insure a perfect fit. Suggestion is to use fingernail clipper if corners need trimmed, most likely the lower 2 corners, or you may use scissors for any straight edges.
After insuring a good fit, you next need to peal the protective back off the decal and use a pair of tweezers to carefully center and apply the decal in the correct location.
After placing the new decal in the correct position, apply light pressure in all points on the surface to insure it properly sticks.
For best adhesion it is important that the target surface be clean and that the decal, after being applied, be afforded 24 hours for the adhesive to fully cure and set. In other words, do not touch for at least 24 hours for the adhesive to properly set.
What is included with this order:
- 1 Casio DBC Databank DBC 600 Permanent-Self-Adhesive Waterproof Vinyl Image Decal Overlay
- 1 Printed Instruction Sheet with above so you understand,this listing aboveshowed the instructions that are included with the order, which statesthe Buyerwill be trimming the border of these decals yourself to insure fit. There is an outline to show you where to cut them. It is all in the instructions. Just wantedthe Buyerto be aware they are not pre-trimmed to the exact size which is whatthe Buyerwill do after you get them.
These decals when trimmed to the boarder are the exact size for a Casio DBC 600 and the image matches that model.
These remanufactured decals are printed in multiple on a single8.5\" x 11\"sheetof Contouring Permanent-Self-Adhesive Waterproof Vinyl using an Epson Workforce 545 Printer. Your decal will be cut from one of those decals on that sheet. Image quality might very slightlyfrom decal to decal depending on how well the printer distributes its ink, but all do come from the same source image which are all identical.
Oneimage shownabove is an actual scan of one of the decals you would receive, taken from the middle of the decals printedpage (without the overprinted text used here only) so that you can see the quality of what you will actually receive.
Because that image aboveis a scanned copy of the printed decal, it is not as good as the actual decal itselfbecausethat photolooses some of its sourceprintingresolution,however it isfairly representative the one youcan expect to receive.
The images show an external dark border around the white line border. The dark is what gets trimmed off so that only the white line border should be left. Think of it as a cutting line to trim to fit.
If you are missing the original keypad image but still have the underlying keypad, you at least need the complete underlyingkeypads intactwherein itis flat enough for this decal to stick to. If parts of the underlying keypadare missing pieces so that this decal would not have even contact over the entire keypad, then I would not advise one of these decals, if the underlying keypad is too damaged for it to stick , otherwiseyou could end up poking holes in the decal whileusing it. In other words, judge for yourself it there is enough underlying keypadto work with before using one of these decals. The risk is up to you under such circumstances.
In order to beeligible for return refund, the item must be returned in same condition asreceived so it may be resold. If youremove the adhesive backing and the adhesive had touched anything that wouldstick to it, that action affects the adhesive and prevents the item from beingresold, ergo, if it is used, you cannot return the decal for a refund. If you are unhappy with the decal, return itbefore cutting it and before removing the adhesive backing, if you want your refundwithout being contested. Otherwise, Iwill contest the return and argue you have damaged the item before returningand item is no longer resalable. Not tryingto be mean, just fair and hope you understand returns are for unused items insame condition as you received it.
Shipping Notes:
These decals will be attached to the instruction sheet and mailed in an9\" x 7\" Cardboard Mailer Envelope.
For U.S.domestic locations this will beshipped by the USPS Ground Advantage with a USPS Tracking Number to insure delivery.
To International buyers,I regret that another member forced me to stop future sales to you.I am not a business, and living on a fixed income and cannot afford such fraudas was recently unsuccessfully attempted.
Should the U.S. Postal Service destroy ordamage this itemand you can provide proof if was destroyed by them before you received it, and it was not damagedbyyou, contact me and a replacement will be sentwherein such is clearly not your fault. I hate when that happens to me, and you should not have to happen to you, but if it does, I will work with you to resolve that problem.
Other Models
I do also have these available for the Casio DBC-61 &Casio DBC-610& Casio CFX-40 &Casio CFX 400under a separate listing. Just search for those Casio models using Search
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.