AP RACING / HPD RADI-CAL RACE BRAKE PACKAGE: 4 CALIPERS, PFC ROTOR RINGS, PFC PADS
These parts came with an ex-motorsport chassis I bought.
Incredibly strong and light brake package designed for LMP1, FIA GT, 24 Hour Lemans and Japan Super GT500 level race builds.
All four calipers are engraved AP Racing / HPD (Honda Performance Development). I don’t know which car they were originally used on, so I won’t guess. They appear to have been rebuilt 10-15 years ago according to a tag on one of the calipers. Every part number below is engraved on the part or printed on the factory box label, and photos of each are included.
I can give no information or opinion on compatibility, fitment or suitability for a specific build using this brake package. I do not have caliper brackets, those would have to be sourced.
CALIPERS
AP Racing CP6160 Radi-CAL 6-piston, one pair
- Rebuilt used calipers
- Castings CP6160-102 (RH) and CP6160-103 (LH), Issue 6
- AP’s LMP1 / FIA-spec monobloc caliper
- 210mm radial mount, internally ported, titanium pistons, carbon cooling ducts, dry breaks
- Rated by AP for carbon or iron discs
- One caliper has a shop rebuild/inspection tag marked “Accepted”
AP Racing CP6078 Radi-CAL 6-piston, one pair
- Castings CP6078-102 (RH) and CP6078-103 (LH), Issue 3, KAC serial numbers
- AP’s GT-spec Radi-CAL, 210mm radial mount
- Labeled LR / RR, with seal-service labels dated 12/12/12
Bodies, threads, bleeders and pad retention hardware are all in decent condition, some surface rust on some. No cracks, no damaged mounting bosses, no stripped threads. Carbon ducts are mostly intact with normal surface wear.
ROTOR RINGS: PFC Direct Drive, new in box, never mounted
- 378 x 35mm: 378.35.0053.04 (RH), dated 04/01/14 and .03 LH
- 355 x 32mm: 355.32.0051.05 / 355.32.0051.06 matched L/R pair, dated 02/18/16
- Rings only. Hats and hardware not included.
- Light surface oxidation on the faces from storage. It will clean up in normal bedding.
PADS: PFC Carbon Metallic, new old stock, never used
- 7778.12.30.44: 12 compound, 30mm
- 7790.08.25.44: 08 compound, 25mm (fits CP6078)
- Surface rust on the backing plates and friction edges from storage. The friction material is full thickness.
NOTES
- Sold as a package. All parts are sold as shown in the photos.
- These are competition parts. You will need your own uprights or adapters for a 210mm radial mount. Any new installation should be checked by a qualified person.
- Because the seals are older, I recommend a fresh seal kit before track use. This is normal practice for any race caliper that has been in storage.
- Ask questions before you buy. Happy to send more photos or measurements.
- Ships fully insured, at buyer expense. This would likely be 2 x 50lb boxes. Local pickup available in Fairfield County, CT.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.