AC110V-220V Intelligent Digital LCD Temperature Humidity Controller SHT20 SensorItem DescriptionTime calibration operation mode:
In the case of power on, long press the setting button to enter the setting interface, short press the setting button to quickly switch (P/F/H), set the time to H, select H1-H5 by the up and down keys, and select the corresponding if you need real-time clock setting H1 item, short press the power button to enter the setting time, the up button is to increase, the down button is to decrease, and the power button is to confirmInstructions for setting operation:
1. In the case of power on, long press the setting button to enter the setting interface, short press in the setting interface to switch quickly (P/F/H), you can use the up and down keys to select P1-P5/F1-F4/H1-H5, and then Short press the power button to confirm and enter the setting parameters
Product parameters:
Product name: Intelligent temperature and humidity controller
Product model: W-1212
Power supply voltage: AC110-220V
Working frequency: 50HZ
Measuring range: -40~+120°C 0~100%RH
Measurement accuracy: temperature ± 0.3°C humidity ± 3%RH
Sensor cable length: 100CM
Size: 79.5*43*36mm
Shell material: surface shell ABS, bottom shell flame retardant ABS
Tips:
①In normal mode, short press the setting key or plus and minus keys to view the setting parameters,
Return to normal mode after 1 second.
②In the setting mode, if no button is pressed, it will automatically return after 10 seconds
Normal working mode.
③In the setting mode, when a certain option value is set, if the power is not pressed
The source key confirms and returns, it will automatically return to the normal working mode after 10 seconds, and the value will notsave.Key Description:
1. Power button: ①Long press the switch
②In the setting mode, short press is the confirmation key
2. Setting key: ①Short press to view the temperature control mode, short press again to view the humidity control mode
②Long press to enter the setting interface, and short press the setting key to select
Select temperature control and humidity control or time mode (ie P, F and H mode switch)
3. Add key: ①On the homepage, short press to view the target temperature switch time, long press to turn on
Target temperature switching time
②In the menu mode, short press and 1 long press and continue to add
4. Minus key: ①Short press on the homepage to view the target humidity switch time, long press to turn on
Target humidity switch time
②In the menu mode, short press to decrease 1 and long press to continue to decrease
5. Combination key: setting key + number minus (restore factory settings)
In the power-on state, pressing and holding the key combination at the same time will restore the factory settings
Mode description:
Manual heating and cooling in temperature control mode and humidification and dehumidification in humidity control mode
Go to set
1. Temperature control mode:
1. Refrigeration mode: (You can short press the setting button on the home page to view, or you can see on the screen
Snowflakes sign, that is, the current cooling mode)
①When real-time temperature ≥ target temperature setting value (OBJ TEMP) + temperature difference setting
It enters the refrigeration state when the value is reached, the relay works and starts refrigeration.
②When the real-time temperature drops to the target temperature setting value (OBJTEMP), the cooling
The relay stops working, the thermostat enters the temperature control state, and the temperature control range is the temperature difference setting
value.
③When real-time temperature ≥ target temperature setting value (OBJ TEMP) + temperature difference again
When the set value is set, the thermostat enters the compressor delay state, and the refrigeration relay after the compressor delay expires
The device just started working.
2. Heating mode: (You can short press the setting button on the home page to view, or you can see on the screen.
Sun sign, that is, the current heating mode)
① When the real-time temperature ≤ target temperature setting value-temperature difference setting value, enter heating
State, the heating relay works.
②When the heating temperature reaches the target temperature value, the heating relay stops working,
The thermostat enters the temperature control state, and the temperature control range is the temperature difference setting value.
Two, humidity control mode:
1. Dehumidification mode: (You can short press the setting button on the home page to view, or you can see on the screen
No water drop sign, that is, the current dehumidification mode)
①When the real-time humidity and humidity temperature difference value (OBJ HUM) ≥ the target humidity value, continue
The appliance starts to work and begins to dehumidify
②When the dehumidification humidity reaches the target humidity value, the dehumidification relay stops working,
Enter the humidity control state, the humidity control range is the humidity setting value.
2. Humidification mode: (You can short press the setting button on the home page to view, or you can see on the screen
Water drop mark, that is, the current humidification mode)
①When real-time humidity + humidity temperature difference value (OBJ HUM) ≤ target humidity value, continue
The appliance starts to work and humidifies
②When the humidification humidity reaches the target humidity value, the humidification relay stops working,
Enter the humidity control state, the humidity control range is the humidity setting value.
Timing description:
Temperature timing switch operation instructions:
①Add the key to control the temperature timing, short press to view the timing on or off the target temperature
, Long press the plus key to start timing
②In the home page interface, short press the plus key to display one one: one TEMP (for
Temperature timer shutdown) Long press the plus button to turn off the target temperature, and it will display when the long press starts
XX:XX TEMP
③In the home page interface, short press the plus key to display
(For warm
(Turn on at a fixed time) long press the plus key to turn on the target temperature regularly, and it will display when the long press starts
XX:XX time
Humidity timer switch operation instructions:
①The minus key controls the humidity timing, short press to view the timing on or off the target humidity
, Long press the minus button to turn on the timing
②In the home page interface, short press the minus button to display one one: one HUM (when
(Previously is humidity timing shutdown) Immediately long press the plus button to turn on the timing shutdown target temperature, when the
Display XX:XX HUM after pressing start
③In the home page interface, short press the minus button to display --:-- (currently
When the temperature is turned on, long press the plus button to turn on the target temperature at the time, when the long press starts
Display XX:XX time afterPackage Included:1PCS*Intelligent temperature and humidity controllerNote: The product is shipped without a battery. Need to buy the battery by himself. The battery model: CR1220 3V button. The battery needs to be calibrated for the first time.Package included:1x AC110V-220V Intelligent Digital LCD Temperature Humidity Controller SHT20 Sensor
- Payment Mathod
- Returns Mathod
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive response, and will do the same in return. DO NOT leave negative response without first communication with us. Ple
Returns Policy1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive response, and will do the same in return. DO NOT leave negative response without first communication
responseWhen you satisfied with our product and services please leave us positive response.
If a problem occurs, contact us immediately with any email request. Just contact us using the \" Ask the seller a question\" link on .We will maill bakc within 24hours
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.