AC110V 120V/220V Timer Infinite-Cycle-Delay Turn ON/OFF Time Relay Switch-Module

Product Description:

Made of - materials for durability
AC110V 120V 220V Timer Infinite Loop Delay On/Off Time Relay Switch
With start/stop function, the enters infinite loop mode after startup, and the relay is in accordance with the
set time.
for scope:
Voltage: AC 100V-250V, can be used for 100V/110V/120V/127V/220V/230V/240V power supply.
Power consumption: <1.0W
Output: Active output, the output voltage is the same as the input voltage. The maximum does not exceed 10A.
Life: 100,000 times
Input: passive switch input, start with green light and stop with red light
Time range: 0.5 seconds - 1000 minutes
Time for : range Max*0.001, or 1000 resolution.
Input (start key): passive switch input, the green light is on first after starting, and the red light stops when it stops.
- No start input required, you can connect the two terminals with a short wire,
This way the power will for cycle indefinitely, with no buttons.
Size: length 88mm*width 38mm*height 22mm or less
Screw hole: center distance 83mm*33mm, hole diameter 3.2mm

terminal:
<-L Power L line (live) input
<-N Power N line (neutral line) input
1> output N, load N line
1> Output: L1, load L line
Most appliances do not need to strictly distinguish the LN line
1> LNC L line output is normally closed, generally not time setting:
The potentiometer adjustment time is marked under RUN TIME, clockwise is to increase the length,
Decrease time counterclockwise.

The potentiometer DIP switch is set to the left time range. The adjustable range of adjustable resistance is 0-100;
The for dial range is 0-1000.
The potentiometer DIP switch unit is set correctly. for dial to seconds. Seconds indicate units; for dial to Min. to
The indicated unit is minutes.

2.OFF time setting:
The potentiometer adjustment time is marked under OFF TIME, clockwise is to increase the length,
Decrease time counterclockwise.
The potentiometer DIP switch is set to the left time range. The adjustable range of adjustable resistance is 0-100;
The for dial range is 0-1000.
The potentiometer DIP switch unit is set correctly. for dial to seconds. Seconds indicate units; for dial to Min. to
The indicated unit is minutes.

3 Start button:
for Access the for reset button, click, switch to the green light, indicating the running state, the will automatically
Stop work according to the running time and time length setting, infinite loop. Click the start button again,
The will switch to a red light, indicating that it is in a stopped state.

4 Example of time setting:
Requirements: connect for 20 seconds, disconnect for 30 minutes, infinite loop.
set for up:
(1). Set the running time range to 0-100;
(2) Set the running time unit to seconds;
(3) Turn the running time potentiometer to the left 20/100 position;
(4). Set the stop time range to 0-100;
(5) Set the stop time unit as minutes;
(6) Turn the stop time potentiometer to the position of 30, that is, the position of 30/100 from the left;

application:
For cyclic controls, or equipment, product burn-in testing repeats power up/down.

notes:
1. If you need to start the button, the button capacity needs to be above 0.1A
2. AC power supply, pay attention to safety

Package Included:
1 * Relay

Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the onlyship to confirmed Order addresses.Please comfirm that your Order for address is in line with your shipping for address.

Please kindly note thatthe combined shippingis not providedbecause the shipping fee is calculated by weight. Also, the each additional item meansexactlythe the same color and size.

It takes about7-15 working days to US; about 10-30 working days to other countries. for transit time may be a little delayed because of thebadweather and customsinspection. If youdonot receive youritemwithin 30 working days since payment finished, please contact us immediately for further assistance.

Payment must be completed within 5 days. If you have any problems about payment, please contact us via .

We strive for customer satisfaction! Positive is very important to us. If you have any questions,please feel free to contact us via "Ask seller a question" . We will reply your for email within 24working hours.