7.5 Hp Phase Converter Control Panel
Brand new phase converter control panel, to be used in conjunction with a 7.5 hp three phase motor. With this setup you will have a 7.5 hp rotary phase converter, your 7.5 hp motor should be rated at 230volt or 230/460voltand a rpm of 17XX or 34XX. Please compare and checkout the features of this control panel.
Builtin push button start and stop
With this setup your phase converter can not self start itself, if there was a power loss and the power came back on. You would need to press the start button to restart up the phase converter, if you had a on-off switch setup your phase converter and your load could try to power up at the same time....which could lead to problems with the phase converter or load or both.
Built in starter contactor for L1 and L2 input power
Power Indicator light
Heavy duty run capacitors rated at 370vac
Balance the generated leg from from L1 and L2 with dual run capacitor circuit
Heavy duty start capacitor rated at 250vac
Heavy duty 50amp contact rated voltage sensing relay that controls the starting circuit of the phase converter ( this design is used by many of the top phase converter manufactures, with over 15 USA patents that used potential relay design to control the starting circuitry ).
Extra large 63amp rated terminal block to connect to youridler motor and three phase equipment.
Ground Screw
Instructions
2 year warranty
Thank you
Please Visit WNY-Supply store for more..
Static Phase Converters
Solid State Phase Converters
Phase Converter Kits
Rotary Phase Converters
Rotary Phase Converter Panels
Phase Converter Parts
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.