|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
6DOF MPU-6050 IIC I2C 3 Axis Gyroscope+Accelerometer Module for Arduino MPU 6050
$5.05

The MPU-60X0 is the world\'s first 9-axis motion processing sensor. It integrates a 3-axis MEMS gyroscope, a 3-axis MEMS accelerometer, and a scalable Digital Motion Processor (DMP). Processor (DMP), which can be connected to a third-party digital sensor, such as a magnetometer, via an I2C interface. After expansion, a 9-axis signal can be output through its I2C or SPI interface (SPI interface is only available on the MPU-6000). the MPU-60X0 can also connect to non-inertial digital sensors, such as pressure sensors, through its I2C interface. The MPU-60X0 uses three 16-bit ADCs for the gyroscope and accelerometer to convert their analogue measurements into digital outputs. In order to accurately track both fast and slow motion, the sensors\' measurement ranges are user-controllable, with the gyroscope measuring 250, earth 500, ±1000, and ±2000/second (dps), and the accelerometer measuring earth 2, ±4, earth 8, and ±16go to an on-chip 1024-byte FIFO, which helps to reduce system power consumption. Communication with all device registers Communication with all device registers is done using either a 400kHz I2C interface or a 1MHz SPI interface (SPI is only available on the MPU-6000). For applications requiring high-speed transfers, register reads and interrupts can be performed using a 20MHz SPI. In addition, an on-chip temperature sensor and an oscillator that varies by only 1% under operating conditions are embedded on the chip.Product Details: Operating Voltage:DC 3~5V Communication Interface:I2C/SPI Gyroscope measurable range is. ±250, earth 500, ±1000, ±2000°/sec. Accelerometer range: ±2, earth 4, earth 8 ±2, 4, 8, ±16g Pin Description: VCC: Power positive GND: Ground SCL: I2C serial clock line/SPI serial clock port SDA:I2C serial data line/SPI serial data input XDA: host data port for connecting other I2C devices XCL: Provide master clock to I2C device AD0: I2C device address selection bit/SPI serial data output INT: Interrupt pin Usage Note: Users should note that the I2C device address is determined by the ADD pin. Package include: According to your choice.Payment: PayPal, PayPal Credit, MasterCard, Apple Pay, Google Pay...are all supported. Shipping:Please make sure your address 100% right. Return Policy:If you are not satisfied with the item,any problem,please contact with us before you give a negative response,because it doesn\'t help you at all.we will try our best to help you solve the problems.response:Your satisfaction is very important for us.If you are satisfied with our item or service,please give us a positive response and 5-Star DSRs rating.Contact Us:We are very glad to help you,please feel free to contact us whatever any problems.Due to high volume of daily incoming emails and time zone difference,please allow 24 hours for us to reply.About Item: For the funcitonal products in our shop,we make sure that the functions are the same as description,but the actual color and shape may looks a little different from pictures because of the technical improvement and manufacturing variance.Please be advised before you offer.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|