50L Vortex Polishing Machine 220V · Technical Documentation 50L Vortex Polishing Machine 220V
This roller polisher‑deburring machine is suitable for hardware, metal, plastic, ceramic and other workpieces. It performs deburring, rust removal and multi‑stage surface polishing, and works well for irregular and complex‑shaped parts.
Driven by centrifugal force, workpieces and abrasives produce intensive friction for uniform surface finishing without compromising original part precision. Featuring stable running, low noise and high grinding efficiency, the machine supports convenient tilting discharge and is widely used for finishing various stamped, machined and cast components.
Product Parameters Voltage220V Electric Motor1.5 kW Rotation Speed of the Turntable0–220 r/min Container Capacity50 L (13.21 gal) Gasket Thickness20 mm (0.79\") Discharge Method100° flip and pour type Working Noise< 60 dB Product Details Drive Motor
Equipped with a high-power gear motor that delivers sufficient torque and stable, strong power for continuous and smooth polishing operations. Its reliable protective structure is suitable for long-term processing conditions with high durability.
Tilting Handle
A one-piece tilting handle provides a stable, effort-saving grip and smooth rotation. Working with the tank\'s tilting structure, it makes it easy to pour out workpieces and abrasives after processing.
Grinding Tank
The tank is lined with a wear-resistant protective layer, and the inner wall features evenly distributed filter holes for solid-liquid separation. The vortex grinding space is rationally designed, allowing workpieces to tumble fully and achieving uniform polishing and deburring results.
Control Panel
Integrates speed regulation, timing, start/stop, and frequency display functions. It supports timed processing and includes an emergency stop button, offering simple, safe, and controllable operation.
Product Features
★Wide Processing Compatibility
It can perform deburring, rust removal, chamfering, and multi-stage polishing on workpieces made of various materials such as metal, hardware, plastic, and ceramics. It is especially effective for irregularly shaped parts and thin, easily deformed workpieces, overcoming the shortcomings of workpiece stacking and uneven grinding in vibratory polishing machines.
★Centrifugal Vortex Grinding without Compromising Precision
Through the centrifugal vortex effect, workpieces and abrasives fully tumble and rub in a spiral motion, ensuring uniform grinding. The process does not damage the original dimensional precision of the workpieces and effectively improves their surface finish.
★Wear-Resistant Lining Protection Design
The grinding tank is lined with a highly wear-resistant polyurethane rubber layer. The tank body can be flipped and used interchangeably to delay wear, extend the machine\'s service life, and protect workpieces from knocks and scratches.
★Variable Frequency Speed Control, Stable Operation
Supports variable frequency speed control to adapt to different working conditions, such as rough or fine processing. The machine runs smoothly with low noise and high grinding efficiency.
★Tilting Discharge for Convenient and Safe Operation
The grinding tank can be tilted at a large angle for discharge and is equipped with a locking mechanism to ensure operational safety. It supports water changes and material replenishment without stopping the machine, making the discharge process simple and effortless.
Operation Instructions
1. Before powering on, use a 0.5mm or smaller feeler gauge to check if the gap between the turntable and the fixed slot is appropriate and if there are any foreign objects inserted. If there are any foreign objects, remove them immediately.
2. Place the workpiece and abrasive in a ratio of 1:2. The total amount should not exceed 30L. Then add an appropriate amount of grinding agent and water. The water level should cover the abrasive on the workpiece. Do not operate without water. The maximum weight of the workpiece should not exceed 1Kg, and the minimum size should be no less than 2mm. Do not add sharp and sharp-edged workpieces.
3. Turn on the power switch, place the speed adjustment knob at zero, press the start button, and then select the speed adjustment knob to the appropriate speed. For rough machining or smaller parts, use 1000r/min or so. For precision machining or larger parts, use 500-800r/min or so. The variable frequency speed control motor should not run at low speed for a long time.
4. During the grinding operation, if the water is dirty, you can continue without stopping. Open the drainage valve at the bottom of the grinding tank, drain the water, then close the valve. Add an appropriate amount of grinding agent and water. For polishing, you can continue to clean. If necessary, you can continue to clean.
5. After the workpiece grinding is completed, open the drainage valve to drain the water. At the same time, turn the speed adjustment knob to zero, the operation will stop. Open the locking device and flip the grinding tank 100° to remove the workpiece.
Precaution
1. Before processing the workpiece, perform degreasing treatment to improve work efficiency and protect the rubber lining.
2. Regularly check the gap between the rotating disc and the fixed groove for any foreign objects. If found, remove them promptly.
3. After 500 hours of operation, the main bearing should be filled with ZL-3 calcium-based lubricating oil once, with an oil volume of about 30 grams.
4. If there is an abnormal noise during operation that persists for 10 minutes, stop the machine immediately to check if any bolts are loose. If the bearing is damaged, replace it promptly.
5. Never run the machine dry without water: Water shortage will accelerate the wear of the lining and cause equipment failure.
6. It is forofferden to feed sharp, edged workpieces: Comply with the weight and size limits of workpieces to prevent equipment jamming.
7. The equipment must be reliably grounded to ensure electrical safety.
8. When the machine is running, keep your hands away from rotating parts. It is forofferden to open the locking mechanism during operation.
9. After processing is completed, drain all sewage first, turn the speed control knob back to zero, then unlock and flip the grinding tank for discharging.
Item Included (033080): 50L Vortex Polishing Machine 220V
You can make order with no worry.
Any concern just feel free to let us know, we\'ll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months\' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
On Nov 19, 2026 at 23:25:25 PST, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.