Product Details
Product Features:
1. The circuit is composed of a triode multivibrator and vibration switch
2. The oscillator controls the two groups of LED alternating light emitting diode, when connected to the rotating LED gyro, vibration switch because of the action of centrifugal force on the power supply, light emitting diode.
3. Suitable for the DIY crowd
4. Compact products
5. Simple operation
Product parameters:
Power supply voltage :DC5-6V power supply
Batteries: 2 CR2303 button batteries (shipped without batteries)
Instructions for use:
1: When loading the battery, the vibration switch S1 is off, so the circuit does not work. When the gyro is rotating, due to the centrifugal action, the vibration switch S1 is connected, the circuit work, the working principle of the multivibrator circuit is, when the power is connected, the two audions Q1, Q2 will compete for pilot pass, but due to the difference of components, only a tube is the most pilot pass. Then two transistors in the circuit will turn on and off, two leds will keep cycling light. When the gyro is rotated, the LED lights will appear in a straight line. Because the lights are staggered, and every two lights are alternately lit, a pattern of dotted lines will appear.
Circuit installation:
▲ Follow the basic principle from short to high, install high components first, and then install high components
▲ Resistor, ceramic capacitor has no positive and negative poles, do not have to distinguish the installation
▲ The short foot of the LED is the negative pole, corresponding to the circuit board LED with shadow part of the direction of installation
▲ There is a triode installation direction, the corresponding circuit board graphics position loading attention: welding attention solder spot can not virtual welding, can not leak welding, welding time can not be too long, after loading again check whether the component installation error, whether leakage welding. Then load the battery (the battery has a positive label), the metal body of the battery buckle is the positive electrode. Then rotate the top to see if it glows. If it does not work, check whether the battery has 3V voltage, whether the component is installed incorrectly, as long as there is no problem welding and installation can be successful.
- Payment Method
- Shipping Method
- Payment must be received in 5 business days of sale closing.
- Please leave note for your special request (e.g. Colors or Size) when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping Policy1. We only ship to the confirmed address provided by . please make sure your address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can\'t take a refund.
response We maintain high standards of excellence and strive for 100% customer satisfaction! response is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative response, so that we can satisfactorily address your concerns.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.