|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
5.8Ghz Wireless XLR Transmitter Receiver Microphone Wireless System
$206.99

Product description - Stable Signal Transmission within 100 Feet
for small stages, singing,church, speech, meeting, live,interview or wedding - Built in Rechargeable Battery
Supports dual USB-C charging and features battery indicator monitoring - Easy to Use and Support Simultaneous Use of 4 Sets
Designed for XLR dynamic microphones, PA speaker, mixer, sound card,audio interfaces with XLR-iuput - Phantom Power for Condenser Mic
Compatible only with certain low-power condenser microphones that require 24V or lower phantom power 1 100FT WIRELESS RANGE 2 5H WORKING TIME 3 PIUG AND PLAY 4 CONDENSER MIC SETUP -
What devices is this wireless microphone system compatible with? Wireless Transmitter: Dynamic mics, some condenser mics requiring 24V or less (phantom power must be enabled) Wireless Receiver: Audio or recording equipment with XLR connectors, such as mixing consoles, PA systems, and sound cards -
Is this compatible with a mixing console’s “LINE IN” input? This product is designed specifically for microphones; the transmitter is not compatible with other audio devices. Even if the connectors are compatible, connecting other devices may result in audio distortion, abnormal volume levels, or malfunction. -
How many sets can I use at the same time? How do I pair them? This product supports one-to-one and one-to-many pairing; up to 4 sets can be used within the same area. Just turn on two devices, then press and hold the pairing button until the blue LED flashes. When the blue LED stays lit, pairing is successful. -
My mic is making noise – what should I check first? 1.dynamic mics: keep phantom power off. 2.condenser mics:turn it on only when needed and check the mic’s power requirement. 3.lower gain, keep the battery charged, check XLR connections, and keep a clear signal path. -
What can I do if I need help with product setup or use? Please send us a message through the Amazon order page if you need any help, we will response within 24H. TECHNICAL SPECIFICATIONS Wireless Band 5.8GHz ISM Latency 100ft Channel 4 Frequency Response 20Hz–20kHz Sampling Rate 24bit / 48kHz Power Supply Built-in rechargeable lithium battery Battery Capacity 3.7V 500mAh Running Time 3.5–5 hours Input Impedance 3.3KΩ Output Impedance 680Ω Charging port USB-C (please don\'t use a fast charger) Transmitter Port XLR Female Port Receiver Port XLR Male Port Package List Transmitter×1, Receiver×1, Dual USB Charging Cable×1, User Manual ×1 - 5.8GHz Stable Wireless Transmission: MW-1 wireless microphone system operate on 5.8GHz ISM frequency band, free from interference. Optimized for any dynamic mic, no need the cable. supoort frequency Hopping,offers 4 switchable channels to run up to 4 sets simultaneously without crosstalk.
- 5ms Latency&100FT Wireless Range: Features less than 5ms ultra-low latency to guarantee perfect real-time audio-video synchronization. Up to 100ft of wireless range, suitable for live vocals, speech, Rehearsal, Karaoke, Church, Interviews, Stage Use
- 5H Working Time & Power Indicator: This wireless xlr mic adapter is equipped with a high-capacity rechargeable lithium battery that provides up to 5 hours of continuous operation per charge. Comes with a 2-in-1 Type-C cable to charge the wireless tranmistter &recevier at the same time.
- Plug & Play: Standard XLR connectors enable instant, hassle-free pairing without software or driver installation. Wireless adapter designed specifically for XLR microphones and non-mixer line inputs (LINE IN).
- IMPORTANT-----Designed for XLR dynamic mic, the devices are also compatible with select condenser models that \"require phantom power of 24V or less\". for best performance and lowest noise, we recommend pairing it with a dynamic mic better. Note: some condenser mics might produce noise due to power draw, shielding, or wireless interference it depends on your setup.
- High Quality Sound Transmission: Delivers 24-bit/48kHz high-definition uncompressed audio with a 20Hz–20kHz full frequency response and 106dB dynamic range. Captures full, natural sound clarity with pristine signal fidelity.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|